[U-Boot-Users] RJ45 pinout of SBC8260

[U-Boot-Users] RJ45 pinout of SBC8260

[duo dong]

Hi,

I plan to load u-boot to a sbc8260 board. There is no
document available for this board. Any one has
information about the pinout of the RJ45 as a serial
port of this board?

Thanks for your help.

DD


		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com 
 

[U-Boot-Users] RJ45 pinout of SBC8260

[Chuck Gales]

Is this the board?

http://www.bsicomputer.com/ftp/pdf/sbc8260.pdf


On Mon, 8 Nov 2004 12:53:09 -0800 (PST), duo dong
<duodong_zheng@yahoo.com> wrote:
> Hi,
> 
> I plan to load u-boot to a sbc8260 board. There is no
> document available for this board. Any one has
> information about the pinout of the RJ45 as a serial
> port of this board?
> 
> Thanks for your help.
> 
> DD
> 
> __________________________________
> Do you Yahoo!?
> Check out the new Yahoo! Front Page.
> www.yahoo.com
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Sybase ASE Linux Express Edition - download now for FREE
> LinuxWorld Reader's Choice Award Winner for best database on Linux.
> http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>

[U-Boot-Users] RJ45 pinout of SBC8260

[Wolfgang Denk]

In message <3c09ea2e0411081309a356019@mail.gmail.com> you wrote:
> 
> http://www.bsicomputer.com/ftp/pdf/sbc8260.pdf

No. It's this one:
http://www.windriver.com/japan/products/files/ppc_sbc8260.pdf

> > I plan to load u-boot to a sbc8260 board. There is no
> > document available for this board. Any one has

I have to  admit  that  it  was  extremely  difficult  to  find  this
document. It turned up as position one when I googled for "sbc8260".

I don't dare to mention that searching for "sbc8260" at
http://www.windriver.com/ even turns up more information...

Best regards,

Wolfgang Denk

-- 
See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I don't know if it's what you want, but it's what you get.  :-)
                      - Larry Wall in <10502@jpl-devvax.JPL.NASA.GOV>

[U-Boot-Users] RJ45 pinout of SBC8260

[Chuck Gales]

According to the SBC8260 manual, there are two serial ports (JP13 &
JP14), but they are RJ-11 ports, not RJ-45.

The pinouts for both are:
Pin 1 - RXDA
Pin 2 - TXDA
Pin 3 - N/C
Pin 4 - Ground

Chuck

On Mon, 08 Nov 2004 22:37:21 +0100, Wolfgang Denk <wd@denx.de> wrote:
> In message <3c09ea2e0411081309a356019@mail.gmail.com> you wrote:
> >
> > http://www.bsicomputer.com/ftp/pdf/sbc8260.pdf
> 
> No. It's this one:
> http://www.windriver.com/japan/products/files/ppc_sbc8260.pdf
> 
> > > I plan to load u-boot to a sbc8260 board. There is no
> > > document available for this board. Any one has
> 
> I have to  admit  that  it  was  extremely  difficult  to  find  this
> document. It turned up as position one when I googled for "sbc8260".
> 
> I don't dare to mention that searching for "sbc8260" at
> http://www.windriver.com/ even turns up more information...
> 
> Best regards,
> 
> Wolfgang Denk
> 
> --
> See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> I don't know if it's what you want, but it's what you get.  :-)
>                       - Larry Wall in <10502@jpl-devvax.JPL.NASA.GOV>
>

[U-Boot-Users] RJ45 pinout of SBC8260

[VanBaren, Gerald]

> -----Original Message-----
> From: u-boot-users-admin at lists.sourceforge.net
> [mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf
> Of duo dong
> Sent: Monday, November 08, 2004 3:53 PM
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] RJ45 pinout of SBC8260
>
> Hi,
>
> I plan to load u-boot to a sbc8260 board. There is no
> document available for this board. Any one has information
> about the pinout of the RJ45 as a serial port of this board?
>
> Thanks for your help.
>
> DD

It is a RJ-11 (telephone style connector in the USofA), not a RJ45
(ethernet).  JP13 pin 1 goes to a MAX3223 R1IN, pin 2 to T1OUT, pin 3 is
unused, and pin 4 is ground.    JP14 has the same wiring to the MAX2332
R2IN, T2OUT.

gvb

******************************************
The following messages are brought to you by the Lawyers' League of
IdioSpeak:

******************************************
The information contained in, or attached to, this e-mail, may contain confidential information and is intended solely for the use of the individual or entity to whom they are addressed and may be subject to legal privilege.  If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager.  Please do not copy it for any purpose, or disclose its contents to any other person.  The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company.  The recipient should check this e-mail and any attachments for the presence of viruses.  The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email.
******************************************