* [U-Boot-Users] u-boot PCMCIA and 405GPr
@ 2004-02-06 13:33 Laurent Mohin
2004-02-06 13:51 ` Wolfgang Denk
0 siblings, 1 reply; 3+ messages in thread
From: Laurent Mohin @ 2004-02-06 13:33 UTC (permalink / raw)
To: u-boot
Hello all,
Sorry if my question has been already answered but I'm unable to browse
the u-boot mailing lists (it seems that I need a subscription to perform
search).
I would like to add PCMCIA support on my board based around a 405GPr and a
Texas PCI1520 chip.
I've enabled CFG_CMD_PCMCIA and encountered an error when compiling
cmd_pcmcia.c (immap_t not defined). This is due to the fact that this file
is mainly build for mpc8xx processors. The only way I've found to get rid
of this error is to enable the CONFIG_I82365 flag which is relevant to an
Intel chip.
Am I missing something?
Laurent
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot-Users] u-boot PCMCIA and 405GPr
2004-02-06 13:33 [U-Boot-Users] u-boot PCMCIA and 405GPr Laurent Mohin
@ 2004-02-06 13:51 ` Wolfgang Denk
2004-02-06 14:47 ` Pierre AUBERT
0 siblings, 1 reply; 3+ messages in thread
From: Wolfgang Denk @ 2004-02-06 13:51 UTC (permalink / raw)
To: u-boot
In message <OFBA50A9D6.565908E1-ONC1256E32.0047A8A8-C1256E32.004A795E@se.wavetek.com> you wrote:
>
> Sorry if my question has been already answered but I'm unable to browse
> the u-boot mailing lists (it seems that I need a subscription to perform
> search).
No subscription is needed.
> I would like to add PCMCIA support on my board based around a 405GPr and a
> Texas PCI1520 chip.
>
> I've enabled CFG_CMD_PCMCIA and encountered an error when compiling
> cmd_pcmcia.c (immap_t not defined). This is due to the fact that this file
> is mainly build for mpc8xx processors. The only way I've found to get rid
> of this error is to enable the CONFIG_I82365 flag which is relevant to an
> Intel chip.
>
> Am I missing something?
You will have to add support for the PCI1520 chip.
Best regards,
Wolfgang Denk
--
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
People are always a lot more complicated than you think. It's very
important to remember that. - Terry Pratchett, _Truckers_
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot-Users] u-boot PCMCIA and 405GPr
2004-02-06 13:51 ` Wolfgang Denk
@ 2004-02-06 14:47 ` Pierre AUBERT
0 siblings, 0 replies; 3+ messages in thread
From: Pierre AUBERT @ 2004-02-06 14:47 UTC (permalink / raw)
To: u-boot
Wolfgang Denk wrote:
>In message <OFBA50A9D6.565908E1-ONC1256E32.0047A8A8-C1256E32.004A795E@se.wavetek.com> you wrote:
>
>
>>Sorry if my question has been already answered but I'm unable to browse
>>the u-boot mailing lists (it seems that I need a subscription to perform
>>search).
>>
>>
>
>No subscription is needed.
>
>
>
I have the same problem as Laurent, since few days, I'm unable to search
anything on the u-boot
mailing list.
>Best regards,
>
>Wolfgang Denk
>
>
>
Best regards
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-02-06 14:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-06 13:33 [U-Boot-Users] u-boot PCMCIA and 405GPr Laurent Mohin
2004-02-06 13:51 ` Wolfgang Denk
2004-02-06 14:47 ` Pierre AUBERT
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox