From: himbA <goavr@email.si>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] serial download of uImage
Date: Tue, 10 Feb 2004 14:44:59 +0100 [thread overview]
Message-ID: <4028E05B.3040700@email.si> (raw)
In-Reply-To: <20040209103643.2A951C108D@atlas.denx.de>
Wolfgang Denk wrote:
>In message <4026D475.3080809@email.si> you wrote:
>
>
>>I'm a newbie to u-boot and pretty much to embedded systems.
>>I have a pxa255 board running 2.4.19 kernel with appropriate patches for
>>ARM and xscale and u-boot 1.0.1 as bootloader already installed by
>>somebody else (I just got the stuff).
>>Now, ethernet link is not working yet, due to some issues with SMSC
>>
>>
>
>As Stefan Linz pointed out it may make sense to try a newer version
>of U-Boot (top of CVS) whichincludes fixes for the ethernet driver.
>
>
>
>>LAN91c111 driver for linux, so I would like to use serial link to
>>download new kernel image. I've built the kernel and I have uImage ready
>>to go. I also have kermit setup according to DULG wiki. I can connect to
>>serial port of my board just fine, issue 'loadb offset' and then hit
>>ctrl-\c, issue 'send uImage'. this the response i get:
>>
>>
>
>First, did you configure kermit as described in
>http://www.denx.de/twiki/bin/view/DULG/SystemSetup#Section_4.3. ??
>
>
>
yes.
>Second, try "send /bin uImage" to make sure to use _binary_ transfer mode.
>
>
>
already tried that...
>>Also is it possible to use SMSC LAN91c111 from u-boot to get
>>dhcp+tftp+nfs boot working?
>>
>>
>
>Sure. Everything is possible :-) But I have no idea how much work
>will be needed to get this working on your board.
>
>Best regards,
>
>Wolfgang Denk
>
>
>
i got a hint from a guy that setup running system, that serial interface
is not configured to be used for serial download with u-boot, on that
board :(
anyways, i'll have alook later, but since my eth interface is up and
running i'm not in a hurry.
rgds.himba
prev parent reply other threads:[~2004-02-10 13:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-09 0:29 [U-Boot-Users] serial download of uImage himbA
2004-02-09 8:36 ` Stephan Linz
2004-02-10 13:42 ` himbA
2004-02-09 10:36 ` Wolfgang Denk
2004-02-10 13:44 ` himbA [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4028E05B.3040700@email.si \
--to=goavr@email.si \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox