From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Wellington Date: Sat, 21 Feb 2004 18:49:01 -0700 Subject: [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform In-Reply-To: <4037E8A7.1010909@xilinx.com> References: <4036B92C.4040507@xilinx.com> <4037B5A5.3030407@lucent.com> <4037E8A7.1010909@xilinx.com> Message-ID: <40380A8D.5090902@lucent.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Peter- Thanks. I had already applied the patch incorrectly and mangled my build tree. But I re-un-hacked it and I am now building u-boot for the ML300. I have downloaded it and it is running right now. If I start having unexplainable problems I'll start fresh with the latest top-of-tree and re-apply the patch according to your instructions. All I need to do is to figure out how to set the ethernet address (no help needed here) and download my kernel which is already built. I may be gone for an hour or two - getting hungry, may walk over to CB & Potts for dinner but I'll be back. Thanks a million! -mike Peter Ryser wrote: > Mike, > > the patch applies cleanly against the latest CVS kernel tree. After > checking out the CVS tree from sourceforge (see > http://sourceforge.net/cvs/?group_id=65938 for instructions, use > u-boot as modulename) change into the root directory of U-Boot and do: > $ gzip -cd ml300.patch.gz | patch -p1 -F0 --dry-run > > If that goes well remove --dry-run to really apply the patch. > > - Peter > > > Mike Welliington wrote: > >> Great! - I've been working on a port of PPCBoot to the ML300, but got >> yanked off to work on our kernel port, which we are booting without a >> bootloader for the time being. But I knew I was going to have to >> come back and finish the port anyway - you just saved me. >> >> I'm new to U-Boot so: >> >> 1) Is this patch intended to be applied to U-Boot 1.0.0 ? >> >> 2) Where can I find out how to apply the patch? >> >> Best Regards, >> >> -mike wellington >> wellington at lucent.com >> Denver, Colorado, USA >> >> >> >> >> >> >> >> Peter Ryser wrote: >> >>> At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a >>> patch that adds support for the Xilinx ML300 platform to U-Boot. >>> Some documentation is provided in doc/README.ml300. >>> >>> The CHANGELOG entry is attached to this email. >>> >>> Please apply the patch to the repository. >>> >>> Thanks and with best regards, >>> - Peter >>> >>> ------------------------------------------------------------------------ >>> >>> >>> * Patch by Peter Ryser, 20 Feb 2004: >>> Add support for the Xilinx ML300 platform >>> (http://www.xilinx.com/ml300). >>> >>> >>> >>> >>> >>> >>> >> >> ------------------------------------------------------- SF.Net is >> sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps >> & Web services for Linux with a free DVD software kit from IBM. Click >> Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click >> _______________________________________________ U-Boot-Users mailing >> list U-Boot-Users at lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users -- =mike wellington wellington at lucent.com 303.920.6412 Desk 720.434.7559 Cell