* [U-Boot-Users] LCLK pin on net device
@ 2004-02-23 18:39 himbA
0 siblings, 0 replies; only message in thread
From: himbA @ 2004-02-23 18:39 UTC (permalink / raw)
To: u-boot
Hi,
looking at the schematics and reference design for smcs 91c111 I found
out that our hardware designer made an error by pulling LCLK pin of
LAN91c111 eth controller low instead high (as datasheet suggests if
using async transfer mode).
Could this lead to potential problems in combination with pxa255 ? He
also reports that they had the same design on older platform with arm
sa1100 and it was doing just fine.
I'm digging through network stuff and my hardware for any errors/faults
and trying to eliminate irelevant stuff.
regards, himba
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-02-23 18:39 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-23 18:39 [U-Boot-Users] LCLK pin on net device himbA
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox