* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
@ 2004-02-21 1:49 Peter Ryser
2004-02-21 19:46 ` Mike Welliington
2004-02-24 0:37 ` [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform Wolfgang Denk
0 siblings, 2 replies; 17+ messages in thread
From: Peter Ryser @ 2004-02-21 1:49 UTC (permalink / raw)
To: u-boot
At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a
patch that adds support for the Xilinx ML300 platform to U-Boot. Some
documentation is provided in doc/README.ml300.
The CHANGELOG entry is attached to this email.
Please apply the patch to the repository.
Thanks and with best regards,
- Peter
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: CHANGELOG
Url: http://lists.denx.de/pipermail/u-boot/attachments/20040220/3d002a47/attachment.txt
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-21 1:49 [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform Peter Ryser
@ 2004-02-21 19:46 ` Mike Welliington
2004-02-21 20:45 ` Wolfgang Denk
` (2 more replies)
2004-02-24 0:37 ` [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform Wolfgang Denk
1 sibling, 3 replies; 17+ messages in thread
From: Mike Welliington @ 2004-02-21 19:46 UTC (permalink / raw)
To: u-boot
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040221/a3f36427/attachment.htm
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-21 19:46 ` Mike Welliington
@ 2004-02-21 20:45 ` Wolfgang Denk
2004-02-21 23:09 ` Peter Ryser
2004-02-21 23:24 ` Peter Ryser
2004-02-22 21:23 ` Mike Wellington
2 siblings, 1 reply; 17+ messages in thread
From: Wolfgang Denk @ 2004-02-21 20:45 UTC (permalink / raw)
To: u-boot
In message <4037B5A5.3030407@lucent.com> you wrote:
> <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
> <html>
> <head>
> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
> <title></title>
> </head>
> <body bgcolor="#ffffff" text="#000000">
Please do not send HTML messages.
Please send plain text only.
Message unreadable, ignored. Sorry.
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
I think there's a world market for about five computers.
-- attr. Thomas J. Watson (Chairman of the Board, IBM), 1943
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-22 21:23 ` Mike Wellington
@ 2004-02-21 22:06 ` Wolfgang Denk
2004-02-22 22:20 ` Mike Wellington
0 siblings, 1 reply; 17+ messages in thread
From: Wolfgang Denk @ 2004-02-21 22:06 UTC (permalink / raw)
To: u-boot
In message <40391DC8.5080506@lucent.com> you wrote:
>
> > Great! - I've been working on a port of PPCBoot to the ML300, but got
> > yanked off to work on our kernel port, which we are booting without a
> > bootloader for the time being. But I knew I was going to have to
> > come back and finish the port anyway - you just saved me.
> >
> > I'm new to U-Boot so:
> >
> > 1) Is this patch intended to be applied to U-Boot 1.0.0 ?
No, more likely to a recent version like 1.0.2 or top-of-tree.
> > 2) Where can I find out how to apply the patch?
Type: "man patch".
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Karl's version of Parkinson's Law: Work expands to exceed the time
alloted it.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-22 22:20 ` Mike Wellington
@ 2004-02-21 22:53 ` Wolfgang Denk
2004-02-22 22:43 ` [U-Boot-Users] Re: U-Boot 1.0.2 sources Mike Wellington
1 sibling, 0 replies; 17+ messages in thread
From: Wolfgang Denk @ 2004-02-21 22:53 UTC (permalink / raw)
To: u-boot
In message <40392B34.5060409@lucent.com> you wrote:
> How do I get the top-of-tree?
"cvs checkout" ? See http://www.cvshome.org/docs/manual/cvs-1.11.13/cvs.html
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Many aligators will be slain, but the swamp will remain.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] Re: U-Boot 1.0.2 sources
2004-02-22 22:43 ` [U-Boot-Users] Re: U-Boot 1.0.2 sources Mike Wellington
@ 2004-02-21 22:54 ` Wolfgang Denk
2004-02-22 1:42 ` Mike Wellington
0 siblings, 1 reply; 17+ messages in thread
From: Wolfgang Denk @ 2004-02-21 22:54 UTC (permalink / raw)
To: u-boot
In message <4039307A.5070809@lucent.com> you wrote:
> Never mind. I found the 1.0.2 tar ball.
> Downloading now...
You should learn to use CVS nevertheless.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Shakespeare's Law of Prototyping: (Hamlet III, iv, 156-160)
O, throw away the worser part of it,
And live the purer with the other half.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-21 20:45 ` Wolfgang Denk
@ 2004-02-21 23:09 ` Peter Ryser
0 siblings, 0 replies; 17+ messages in thread
From: Peter Ryser @ 2004-02-21 23:09 UTC (permalink / raw)
To: u-boot
Wolfgang et al.,
here is the relevant message in plain text:
At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a
patch that adds support for the Xilinx ML300 platform to U-Boot. Some
documentation is provided in doc/README.ml300.
The CHANGELOG entry follows further down.
Please apply the patch to the repository.
Thanks and with best regards,
- Peter
CHANGELOG entry:
* Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform
(http://www.xilinx.com/ml300).
Wolfgang Denk wrote:
>In message <4037B5A5.3030407@lucent.com> you wrote:
>
>
>><!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
>><html>
>><head>
>> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
>> <title></title>
>></head>
>><body bgcolor="#ffffff" text="#000000">
>>
>>
>
>
>Please do not send HTML messages.
>
>Please send plain text only.
>
>Message unreadable, ignored. Sorry.
>
>
>
>Wolfgang Denk
>
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-21 19:46 ` Mike Welliington
2004-02-21 20:45 ` Wolfgang Denk
@ 2004-02-21 23:24 ` Peter Ryser
2004-02-22 1:49 ` Mike Wellington
2004-02-22 21:23 ` Mike Wellington
2 siblings, 1 reply; 17+ messages in thread
From: Peter Ryser @ 2004-02-21 23:24 UTC (permalink / raw)
To: u-boot
Mike,
the patch applies cleanly against the latest CVS kernel tree. After
checking out the CVS tree from sourceforge (see
http://sourceforge.net/cvs/?group_id=65938 for instructions, use u-boot
as modulename) change into the root directory of U-Boot and do:
$ gzip -cd ml300.patch.gz | patch -p1 -F0 --dry-run
If that goes well remove --dry-run to really apply the patch.
- Peter
Mike Welliington wrote:
> Great! - I've been working on a port of PPCBoot to the ML300, but got
> yanked off to work on our kernel port, which we are booting without a
> bootloader for the time being. But I knew I was going to have to
> come back and finish the port anyway - you just saved me.
>
> I'm new to U-Boot so:
>
> 1) Is this patch intended to be applied to U-Boot 1.0.0 ?
>
> 2) Where can I find out how to apply the patch?
>
>Best Regards,
>
>-mike wellington
> wellington at lucent.com
> Denver, Colorado, USA
>
>
>
>
>
>
>
> Peter Ryser wrote:
>
>> At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a
>> patch that adds support for the Xilinx ML300 platform to U-Boot. Some
>> documentation is provided in doc/README.ml300.
>>
>> The CHANGELOG entry is attached to this email.
>>
>> Please apply the patch to the repository.
>>
>> Thanks and with best regards,
>> - Peter
>>
>>------------------------------------------------------------------------
>>
>>* Patch by Peter Ryser, 20 Feb 2004:
>> Add support for the Xilinx ML300 platform
>> (http://www.xilinx.com/ml300).
>>
>>
>>
>>
>>
>>
>>
>
> ------------------------------------------------------- SF.Net is
> sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps &
> Web services for Linux with a free DVD software kit from IBM. Click
> Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> _______________________________________________ U-Boot-Users mailing
> list U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] Re: U-Boot 1.0.2 sources
2004-02-21 22:54 ` Wolfgang Denk
@ 2004-02-22 1:42 ` Mike Wellington
0 siblings, 0 replies; 17+ messages in thread
From: Mike Wellington @ 2004-02-22 1:42 UTC (permalink / raw)
To: u-boot
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040221/beb94cbb/attachment.htm
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-21 23:24 ` Peter Ryser
@ 2004-02-22 1:49 ` Mike Wellington
0 siblings, 0 replies; 17+ messages in thread
From: Mike Wellington @ 2004-02-22 1:49 UTC (permalink / raw)
To: u-boot
Peter-
Thanks. I had already applied the patch incorrectly and mangled my
build tree.
But I re-un-hacked it and I am now building u-boot for the ML300. I have
downloaded it and it is running right now. If I start having
unexplainable problems
I'll start fresh with the latest top-of-tree and re-apply the patch
according to
your instructions.
All I need to do is to figure out how to set the ethernet address (no
help needed here)
and download my kernel which is already built.
I may be gone for an hour or two - getting hungry, may walk over to CB &
Potts for
dinner but I'll be back.
Thanks a million!
-mike
Peter Ryser wrote:
> Mike,
>
> the patch applies cleanly against the latest CVS kernel tree. After
> checking out the CVS tree from sourceforge (see
> http://sourceforge.net/cvs/?group_id=65938 for instructions, use
> u-boot as modulename) change into the root directory of U-Boot and do:
> $ gzip -cd ml300.patch.gz | patch -p1 -F0 --dry-run
>
> If that goes well remove --dry-run to really apply the patch.
>
> - Peter
>
>
> Mike Welliington wrote:
>
>> Great! - I've been working on a port of PPCBoot to the ML300, but got
>> yanked off to work on our kernel port, which we are booting without a
>> bootloader for the time being. But I knew I was going to have to
>> come back and finish the port anyway - you just saved me.
>>
>> I'm new to U-Boot so:
>>
>> 1) Is this patch intended to be applied to U-Boot 1.0.0 ?
>>
>> 2) Where can I find out how to apply the patch?
>>
>> Best Regards,
>>
>> -mike wellington
>> wellington at lucent.com
>> Denver, Colorado, USA
>>
>>
>>
>>
>>
>>
>>
>> Peter Ryser wrote:
>>
>>> At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a
>>> patch that adds support for the Xilinx ML300 platform to U-Boot.
>>> Some documentation is provided in doc/README.ml300.
>>>
>>> The CHANGELOG entry is attached to this email.
>>>
>>> Please apply the patch to the repository.
>>>
>>> Thanks and with best regards,
>>> - Peter
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> * Patch by Peter Ryser, 20 Feb 2004:
>>> Add support for the Xilinx ML300 platform
>>> (http://www.xilinx.com/ml300).
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>> ------------------------------------------------------- SF.Net is
>> sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps
>> & Web services for Linux with a free DVD software kit from IBM. Click
>> Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
>> _______________________________________________ U-Boot-Users mailing
>> list U-Boot-Users at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
>
>
>
>
> -------------------------------------------------------
> SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> Build and deploy apps & Web services for Linux with
> a free DVD software kit from IBM. Click Now!
> http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
--
=mike wellington
wellington at lucent.com
303.920.6412 Desk
720.434.7559 Cell
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-21 19:46 ` Mike Welliington
2004-02-21 20:45 ` Wolfgang Denk
2004-02-21 23:24 ` Peter Ryser
@ 2004-02-22 21:23 ` Mike Wellington
2004-02-21 22:06 ` Wolfgang Denk
2 siblings, 1 reply; 17+ messages in thread
From: Mike Wellington @ 2004-02-22 21:23 UTC (permalink / raw)
To: u-boot
Mike Welliington wrote:
> Great! - I've been working on a port of PPCBoot to the ML300, but got
> yanked off to work on our kernel port, which we are booting without a
> bootloader for the time being. But I knew I was going to have to
> come back and finish the port anyway - you just saved me.
>
> I'm new to U-Boot so:
>
> 1) Is this patch intended to be applied to U-Boot 1.0.0 ?
>
> 2) Where can I find out how to apply the patch?
>
>Best Regards,
>
>-mike wellington
> wellington at lucent.com
> Denver, Colorado, USA
>
>
>
>
>
>
>
> Peter Ryser wrote:
>
>> At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a
>> patch that adds support for the Xilinx ML300 platform to U-Boot. Some
>> documentation is provided in doc/README.ml300.
>>
>> The CHANGELOG entry is attached to this email.
>>
>> Please apply the patch to the repository.
>>
>> Thanks and with best regards,
>> - Peter
>>
>>------------------------------------------------------------------------
>>
>>* Patch by Peter Ryser, 20 Feb 2004:
>> Add support for the Xilinx ML300 platform
>> (http://www.xilinx.com/ml300).
>>
>>
>>
>>
>>
>>
>>
>
> ------------------------------------------------------- SF.Net is
> sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps &
> Web services for Linux with a free DVD software kit from IBM. Click
> Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> _______________________________________________ U-Boot-Users mailing
> list U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-21 22:06 ` Wolfgang Denk
@ 2004-02-22 22:20 ` Mike Wellington
2004-02-21 22:53 ` Wolfgang Denk
2004-02-22 22:43 ` [U-Boot-Users] Re: U-Boot 1.0.2 sources Mike Wellington
0 siblings, 2 replies; 17+ messages in thread
From: Mike Wellington @ 2004-02-22 22:20 UTC (permalink / raw)
To: u-boot
How do I get the top-of-tree?
-mike
Wolfgang Denk wrote:
>No, more likely to a recent version like 1.0.2 or top-of-tree.
>
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] Re: U-Boot 1.0.2 sources
2004-02-22 22:20 ` Mike Wellington
2004-02-21 22:53 ` Wolfgang Denk
@ 2004-02-22 22:43 ` Mike Wellington
2004-02-21 22:54 ` Wolfgang Denk
1 sibling, 1 reply; 17+ messages in thread
From: Mike Wellington @ 2004-02-22 22:43 UTC (permalink / raw)
To: u-boot
Never mind. I found the 1.0.2 tar ball.
Downloading now...
-mike w..
Mike Wellington wrote:
> How do I get the top-of-tree?
>
> -mike
>
> Wolfgang Denk wrote:
>
>> No, more likely to a recent version like 1.0.2 or top-of-tree.
>>
>>
>>
>
>
>
> -------------------------------------------------------
> SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> Build and deploy apps & Web services for Linux with
> a free DVD software kit from IBM. Click Now!
> http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-21 1:49 [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform Peter Ryser
2004-02-21 19:46 ` Mike Welliington
@ 2004-02-24 0:37 ` Wolfgang Denk
2004-02-24 0:44 ` Peter Ryser
1 sibling, 1 reply; 17+ messages in thread
From: Wolfgang Denk @ 2004-02-24 0:37 UTC (permalink / raw)
To: u-boot
In message <4036B92C.4040507@xilinx.com> you wrote:
>
> At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a
> patch that adds support for the Xilinx ML300 platform to U-Boot. Some
> documentation is provided in doc/README.ml300.
I understand this is the same patch you sent before which got
rejected because of the list's attachment size limit?
Can you please verify that the code in CVS is complete and up to date?
Thanks.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
"In matters of principle, stand like a rock; in matters of taste,
swim with the current." - Thomas Jefferson
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-24 0:37 ` [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform Wolfgang Denk
@ 2004-02-24 0:44 ` Peter Ryser
2004-02-24 1:06 ` Wolfgang Denk
0 siblings, 1 reply; 17+ messages in thread
From: Peter Ryser @ 2004-02-24 0:44 UTC (permalink / raw)
To: u-boot
>I understand this is the same patch you sent before which got
>rejected because of the list's attachment size limit?
>
Yes, that's correct.
>Can you please verify that the code in CVS is complete and up to date?
>
I just did an update as well as a complete checkout and cannot (yet?)
see the code. I will try again later.
- Peter
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-24 0:44 ` Peter Ryser
@ 2004-02-24 1:06 ` Wolfgang Denk
2004-02-24 4:00 ` Peter Ryser
0 siblings, 1 reply; 17+ messages in thread
From: Wolfgang Denk @ 2004-02-24 1:06 UTC (permalink / raw)
To: u-boot
Dear Peter,
in message <403A9E59.8000201@xilinx.com> you wrote:
>
> >I understand this is the same patch you sent before which got
> >rejected because of the list's attachment size limit?
> >
> Yes, that's correct.
Thanks for the confirmation.
> >Can you please verify that the code in CVS is complete and up to date?
> >
> I just did an update as well as a complete checkout and cannot (yet?)
> see the code. I will try again later.
Please do. Updates and access to SourceForge's anonymous server is
always awfully slow.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Is the glass half empty, half full, or twice as large as it needs to
^ permalink raw reply [flat|nested] 17+ messages in thread
* [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform
2004-02-24 1:06 ` Wolfgang Denk
@ 2004-02-24 4:00 ` Peter Ryser
0 siblings, 0 replies; 17+ messages in thread
From: Peter Ryser @ 2004-02-24 4:00 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
the code for the Xilinx ML300 checks out, compiles, and works as expected.
Thanks,
- Peter
>>I just did an update as well as a complete checkout and cannot (yet?)
>>see the code. I will try again later.
>>
>>
>
>Please do. Updates and access to SourceForge's anonymous server is
>always awfully slow.
>
>Best regards,
>
>Wolfgang Denk
>
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2004-02-24 4:00 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-21 1:49 [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform Peter Ryser
2004-02-21 19:46 ` Mike Welliington
2004-02-21 20:45 ` Wolfgang Denk
2004-02-21 23:09 ` Peter Ryser
2004-02-21 23:24 ` Peter Ryser
2004-02-22 1:49 ` Mike Wellington
2004-02-22 21:23 ` Mike Wellington
2004-02-21 22:06 ` Wolfgang Denk
2004-02-22 22:20 ` Mike Wellington
2004-02-21 22:53 ` Wolfgang Denk
2004-02-22 22:43 ` [U-Boot-Users] Re: U-Boot 1.0.2 sources Mike Wellington
2004-02-21 22:54 ` Wolfgang Denk
2004-02-22 1:42 ` Mike Wellington
2004-02-24 0:37 ` [U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform Wolfgang Denk
2004-02-24 0:44 ` Peter Ryser
2004-02-24 1:06 ` Wolfgang Denk
2004-02-24 4:00 ` Peter Ryser
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox