From: Mike Wellington <wellington@lucent.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] ML300 NFS rfs mount problem
Date: Fri, 12 Mar 2004 11:18:57 -0700 [thread overview]
Message-ID: <4051FF11.6080902@lucent.com> (raw)
My kernel command line is set as follows in
include/configs/ml300.h
> #define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw \
> nfsroot=135.4.21.60:/opt2/timesys/linux/4.0/amxap100/rfs \
> rootpath=/opt2/timesys/linux/4.0/amxap100/rfs \
> ip=135.4.21.155:135.4.21.60:135.4.21.254:255.255.254.0:prolab6::off"
However when the kernel outputs its command line
during the boot process I see:
"Kernel command line: console=ttyS0,9600
root=/dev/nfs rw
nfsroot=135.4.21.60:/opt2/timesys/linux/4.0/amxap100/rfs
rootpath=/opt2/timesys/linux/4.0/amxap100/rfs
ip=135.4.21.155:135.4.21.60:135.4.21.254:255.255.254.0:prolab6::off"
Then, later I see:
"IP-Config: Complete: device=eth0,
addr=135.4.21.155, mask=255.255.254.0,
gw=135.4.21.254, host=prolab6, domain=,
nis-domain=(none)
bootserver=135.4.21.60 rootserver=135.4.21.60
rootpath="
Note that rootpath is now empty, even though I
set it on the command line.
Can somebody give me a clue?
--
=mike wellington
wellington at lucent.com
303.920.6412 Desk
720.434.7559 Cell
next reply other threads:[~2004-03-12 18:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-12 18:18 Mike Wellington [this message]
2004-03-12 22:01 ` [U-Boot-Users] ML300 NFS rfs mount problem himbA
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4051FF11.6080902@lucent.com \
--to=wellington@lucent.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox