From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ronen Shitrit <rshitrit@il.marvell.com>
Date: Tue, 16 Mar 2004 18:03:58 +0200
Subject: [U-Boot-Users] MIPS (purple) compilation problems.
References: <404DBFBF.50808@il.marvell.com>
Message-ID: <4057256E.3080604@il.marvell.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi

I'm trying to port the U-Boot to Marvell board with MIPS (rm7000)
I see that after relocating to the DRAM the disassembly of the u-boot 
shows me
that we jump back to the flash:
start.S:                                            dis:
la     t9,board_init_r                    lui     t9,0xbfc1
                                                  addiu     t9,20140
j      t9                                        jr     t9

I see that I get the same problem when I jump to printf etc.
maybe it is because I don't compile the code as PIC? Is there any 
special compilation flag I should use?
Can someone please send me a disassembly of the U-Boot for any of the 
MIPS board (purple, incaip or dbaux100).

Is there any special handle for relocating of the MIPS that is different 
from the PPC, that I should take under consideration???

Thanks Ronen

Ronen Shitrit wrote:

> Hi
>
> I'm trying to port the U-Boot to Marvell board with MIPS (rm7000)
> I am using a cross compiler mips64-elf.
> I'm trying to compile the purpule_config and I have some compilation 
> problems,
> when I'm using the cpu/mips/config  flag -mabicalls I get a lot of 
> warnings:
>      c1: warning: -G is incompatible with PIC code which is the default
>       .........
> and an LD error:
>      mips64-elf-ld: common/main.o: linking PIC files with non-PIC files
>      Bad value: failed to merge target specific data of file 
> common/main.o
>
> When I remove the -mabicalls flag, the compilation pass, and the LD 
> fail again on different error:
>        mips64-elf-ld: target elf32-tradbigmips not found
>
> The LD is looking for elf32-tradbigmips because in the LD script we 
> define the output file to be: elf32-tradbigmips
>
> why do we use this definition and not elf32-bigmips??  and what is the 
> difference between these two??
> and why when I install my cross compiler I don't have support for this 
> output format??
>
> so I changed it the output format to elf32-bigmips then I'm getting 
> this LD error:
>            : undefined reference to `_GLOBAL_OFFSET_TABLE_'
>
> I know it is because I don't have this define in the linker script, 
> and I guess the elf32-tradbigmips has this definition.
> What should I do??
>
> Thanks
>

-- 
Ronen Shitrit

M.S.I.L
D.N. Misgav  20184
Tel:   +972-4-9951000
Fax:   +972-4-9951001
Email: mailto: ronen.shitrit at il.marvell.com
_____________________________________________________________
This message may contain confidential, proprietary or legally privileged 
information. The information is intended only for the use of the individual 
or entity named above. If the reader of this message is not the intended 
recipient, you are hereby notified that any dissemination, distribution 
or copying of this communication is strictly prohibited. If you have 
received this communication in error, please notify us immediately by 
telephone, or by e-mail and delete the message from your computer.