From mboxrd@z Thu Jan  1 00:00:00 1970
From: Schwarz,Andre <andre.schwarz@matrix-vision.de>
Date: Thu, 11 Nov 2010 21:11:43 +0100 (CET)
Subject: [U-Boot] MPC8377: USB breaks board
In-Reply-To: <AANLkTinMVbsakGTbz44EWA23C3F_GEOLo=uYRJ98TuC8@mail.gmail.com>
References: <4CD419E1.1060203@matrix-vision.de>
	<4CDBE085.8050007@matrix-vision.de>
	<AANLkTinMVbsakGTbz44EWA23C3F_GEOLo=uYRJ98TuC8@mail.gmail.com>
Message-ID: <407624213.65.1289506303900.JavaMail.open-xchange@proteus>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Timur,
?

> > - Activating USB support within U-Boot leads to *very* early crash :
> > ? ? ?No console output - not even PCI clocks enabled.
>
> I don't know anything about USB or the 8377, but it could be that
> you're U-Boot image is too large.? Try disabling some other large
> feature (like PCI and Ethernet support) and booting that image.?
I'm at 300KiB at the moment with plenty of flash.
Is there anything specific you're thinking about ?
?
?
Will try to dig into it by disabling USB init functions step-by-step then ...
?
?
Cheers,
Andr?

MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner