[U-Boot-Users] u-boot for OMAP730

[Dave Peverley <dpeverley@mpc-data.co.uk>]

Sammy_Yang at compal.com wrote:
>         Does some use u-boot on OMAP730 platform, cause I would like use 
> OMAP1610 configuration to OMAP730, but it's not work.:(
Yes, I finished a port to the OMAP730 / P2Sample board a while back. While
this is loosely based on the 1610 port, you must remember the processors
and boards are signifificantly different in their configurations so you
can't expect it to work! 

I'm currently in the process of finishing merging in from the v1.1.0 tag 
and cleaning up the code ready for submitting back to the main CVS as 
detailed in the u-boot README to hopefully get it accepted first-time and
avoid the wrath of Wolfgang :-) I hope to do this in the next few days. 
If you're *really* desperate I could probably send you a copy of the 
current almost-done patch as it stands as it runs fine (bar a wierd 
bug in the SMC ethernet support that isnt omap730 specific)

Best Wishes,

Dave Peverley

---------------------------------------------------------------------------
             Dave Peverley, Software Engineer, MPC Data Limited.
Phone : [+44] (0) 1225 868 228              Web : http://www.mpc-data.co.uk