[U-Boot] [PATCH 1/2] sunxi: binman: Add U-Boot binary size check

[Frank Kunz <mailinglists@kunz-im-inter.net>]

Am Freitag, 3. November 2017, 09:42:44 CET schrieb Maxime Ripard:
> Hi Frank,
> 
> On Thu, Nov 02, 2017 at 04:53:54PM +0100, Frank Kunz wrote:
> > Am Donnerstag, 19. Oktober 2017, 16:04:18 CET schrieb Maxime Ripard:
> > > The U-boot binary may trip over its actual allocated size in the
> > > storage.
> > > In such a case, the environment will not be readable anymore (because
> > > corrupted when the new image was flashed), and any attempt at using
> > > saveenv
> > > to reconstruct the environment will result in a corrupted U-boot binary.
> > > 
> > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > > ---
> > > 
> > >  arch/arm/dts/sunxi-u-boot.dtsi | 11 +++++++++++
> > >  1 file changed, 11 insertions(+)
> > 
> > I found that this patch causes the sunxi-fel tool to fail with:
> > 
> > sunxi-fel uboot u-boot-sunxi-with-spl.bin
> > U-Boot image data size mismatch: expected 516032, got 389212
> > 
> > Is there a patch for the sunxi tools missing?
> 
> No, because no one reported it so far.
> 
> Can you test with:
> http://code.bulix.org/mb0ic7-221765?raw
> 

That works.

Tested-by: Frank Kunz <mailinglists@kunz-im-inter.net>