[U-Boot-Users] toolchain

[U-Boot-Users] toolchain

[himba]

Hi,

I'm trying to compile u-boot 1.1.1 with 2.95.3 arm toolchain and I get 
following error:
make[1]: Leaving directory 
`/home/roaher/delo/xxcep/bootldr/tmp/u-boot/post/cpu'
...
arm-linux-gcc -Wa,-gstabs -D__ASSEMBLY__ -g  -Os 
-fno-strict-aliasing  -fno-common -ffixed-r8 -mshort-load-bytes 
-msoft-float -D__KERNEL__ -DTEXT_BASE=0xa3f00000 
-I/home/roaher/delo/xxcep/bootldr/tmp/u-boot/include -fno-builtin 
-ffreestanding -nostdinc -isystem 
/usr/lib/gcc-lib/i586-suse-linux/3.3.1/include -pipe  -DCONFIG_ARM 
-D__ARM__ -mapcs-32 -march=armv4 -mtune=strongarm1100 -c -o 
cpu/pxa/start.o /home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S
/home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S: Assembler 
messages:
/home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S:148: Error: 
Internal_relocation (type 208) not fixed up (IMMEDIATE)
make: *** [cpu/pxa/start.o] Error 1
....

Compiling older version works just fine with this toolchain. I tried 
3.3.2 and 3.3.3 toolchains from arm.nihilisme.ca but booth fail with 
some error about FP misuse.

What arm toolchain should I use with new u-boot?

regards, himba

[U-Boot-Users] toolchain

[himba]

Hmm, please ignore the previous post - I've overlooked some minor 
changes in my port that solved the problem.



himba wrote:
> Hi,
> 
> I'm trying to compile u-boot 1.1.1 with 2.95.3 arm toolchain and I get 
> following error:
> make[1]: Leaving directory 
> `/home/roaher/delo/xxcep/bootldr/tmp/u-boot/post/cpu'
> ...
> arm-linux-gcc -Wa,-gstabs -D__ASSEMBLY__ -g  -Os -fno-strict-aliasing  
> -fno-common -ffixed-r8 -mshort-load-bytes -msoft-float -D__KERNEL__ 
> -DTEXT_BASE=0xa3f00000 
> -I/home/roaher/delo/xxcep/bootldr/tmp/u-boot/include -fno-builtin 
> -ffreestanding -nostdinc -isystem 
> /usr/lib/gcc-lib/i586-suse-linux/3.3.1/include -pipe  -DCONFIG_ARM 
> -D__ARM__ -mapcs-32 -march=armv4 -mtune=strongarm1100 -c -o 
> cpu/pxa/start.o /home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S
> /home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S: Assembler 
> messages:
> /home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S:148: Error: 
> Internal_relocation (type 208) not fixed up (IMMEDIATE)
> make: *** [cpu/pxa/start.o] Error 1
> ....
> 
> Compiling older version works just fine with this toolchain. I tried 
> 3.3.2 and 3.3.3 toolchains from arm.nihilisme.ca but booth fail with 
> some error about FP misuse.
> 
> What arm toolchain should I use with new u-boot?
> 
> regards, himba
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by the new InstallShield X.
> 
>> From Windows to Linux, servers to mobile, InstallShield X is the one
> 
> installation-authoring solution that does it all. Learn more and
> evaluate today! http://www.installshield.com/Dev2Dev/0504
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>