[PATCH v6 0/6] rockchip: Add Binman support

[Wadim Egorov <w.egorov@phytec.de>]

Hi Jagan,

On 09.01.20 14:59, Jagan Teki wrote:
> On Wed, Jan 8, 2020 at 5:04 PM Wadim Egorov <w.egorov@phytec.de> wrote:
>> Hi,
>>
>> On 07.01.20 10:59, Kever Yang wrote:
>>> Add Wadim in cc,
>>>
>>> Hi Jagan,
>>>
>>> After this patch set apply, the phycore-rk3288 board's SPL size is
>>> overflow:
>>>
>>>        arm:  +   phycore-rk3288
>>> +Error: SPL image is too large (size 0x9000 than 0x8000)
>>> +Error: Bad parameters for image type
>>>
>>> Maybe we need to enable the TPL for this board? @Wadim
>> I would like it to keep the SPL for the phyCORE board. In this thread
>> [1] I pointed out that you can drop the phycore_init() function that was
>> sometimes blowing up the size of the phyCORE SPL image. So if there is
>> no new other feature that increases the SPL size, we can just remove the
>> code and the SPL should fit again. If you like I can take a look at this
>> next week.
> This won't help much, but one possibility is to use SPL_OF_PLATDATA
> (I've verified). Can you help us to try as quickly as possible? or do
> you want us to try?

Or we can simply disable CONFIG_SPL_I2C_SUPPORT and
CONFIG_SPL_POWER_SUPPORT in the phycore-rk3288_defconfig.
What do you want me to do now? Testing your patches with
SPL_OF_PLATDATA=y on our board? If so, I can help you next week with
testing.