From: Thomas Laman <tlaman@rochester.rr.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Software emulation exception on entry into RAM
Date: Thu, 29 Jul 2004 21:06:05 -0400 [thread overview]
Message-ID: <41099EFD.7060702@rochester.rr.com> (raw)
I am implementing u-boot 1.0.2 on a custom 860P board and am getting a
Software Emulation Exception
(as reported by BDI2000) at the first access of RAM after code is copied
to RAM.
The SDRAM setup was copied from a working PSOS+ load running on this
board. Successful burst
reads have been verified with a logic analyzer. I can't easily get
access to the logic analyzer for debugging
u-boot.
I have defined SRAM to be at 0x0 and I get the same results.
I know I am not using the CVS version of u-boot, I am using what was
supplied w/ ELDK 3.0.
I have searched the list and have found cases where SDRAM
initialization/burst read configurations have been
blamed. Based on success w/ PSOS+, I don't think this is my problem.
Any ideas?
-Tom Laman
next reply other threads:[~2004-07-30 1:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-30 1:06 Thomas Laman [this message]
2004-07-30 9:56 ` [U-Boot-Users] Software emulation exception on entry into RAM Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2004-07-30 7:41 Michael Bendzick
2004-07-30 9:31 ` Thomas Laman
2004-07-30 10:02 ` Wolfgang Denk
2004-07-31 12:04 ` Thomas Laman
2004-07-31 12:34 ` Wolfgang Denk
2004-07-30 9:59 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41099EFD.7060702@rochester.rr.com \
--to=tlaman@rochester.rr.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox