[U-Boot-Users] OCOTEA tech details

[U-Boot-Users] OCOTEA tech details

[Andrew Wozniak]

Hello everyone,

We are porting U-Boot to a custom PPC440GX board and I was hoping to use 
the ocotea port of U-Boot as a starting point. It would be most helpful 
if I had a user manual for the ocotea with specific details about I/O 
devices, memory maps...

Unfortunately, IBM's support site does not provide any technical 
literature for this board.  A searched of the AMCC website turned up 
nothing - they had recently acquired the Intellectual Property and a 
Portfolio for the PPC4xx.

Could anyone suggest where I can find the necessary technical details 
for the ocotea, to assist with my port?

Best Regards, Andy Wozniak

[U-Boot-Users] OCOTEA tech details

[Ralph Siemsen]

Andrew Wozniak wrote:

> Could anyone suggest where I can find the necessary technical details 
> for the ocotea, to assist with my port?

Docs are still available from IBM:
http://www-306.ibm.com/chips/techlib/techlib.nsf/products/PowerPC_440GX_Embedded_Processor

and particular the "User Guide" which describes all the onboard 
peripherals, memory map of CPU etc.
http://www-306.ibm.com/chips/techlib/techlib.nsf/techdocs/8D7ED9725397528E87256C850068F58E

Presumably these will eventually move to the AMCC web site.
-R

[U-Boot-Users] OCOTEA tech details

[Andrew Wozniak]

Thanks to everyone that responded. I now have the necessary documentation.

-Andy

Ralph Siemsen wrote:
> Andrew Wozniak wrote:
> 
>> Could anyone suggest where I can find the necessary technical details 
>> for the ocotea, to assist with my port?
> 
> 
> Docs are still available from IBM:
> http://www-306.ibm.com/chips/techlib/techlib.nsf/products/PowerPC_440GX_Embedded_Processor 
> 
> 
> and particular the "User Guide" which describes all the onboard 
> peripherals, memory map of CPU etc.
> http://www-306.ibm.com/chips/techlib/techlib.nsf/techdocs/8D7ED9725397528E87256C850068F58E 
> 
> 
> Presumably these will eventually move to the AMCC web site.
> -R
>