[U-Boot-Users] FEC and TSEC in MPC8540...

[U-Boot-Users] FEC and TSEC in MPC8540...

[sivam]

Hi All,

I am trying to use both TSEC and FEC interface in MPC8540 in U-Boot . Is 
it possible for me to use both the interface in U-Boot  and ping from 
outside thro' these 2 interfaces ?.  Right now i could use only one 
interface i.e TSEC ?. Can anyone shed some light on this.

Thanks and Regards
sivam

[U-Boot-Users] FEC and TSEC in MPC8540...

[Andy Fleming]

You cannot ping the bootloader, as far as I know.  You can ping from
u-boot, but not the other way around.  Also, only one interface
(TSEC1, TSEC2, or FEC) will be active at any one time, and only while
u-boot is executing a network command.


On Fri, 10 Sep 2004 21:41:02 +0530, sivam <mg.sivam@gdatech.co.in> wrote:
> Hi All,
> 
> I am trying to use both TSEC and FEC interface in MPC8540 in U-Boot . Is
> it possible for me to use both the interface in U-Boot  and ping from
> outside thro' these 2 interfaces ?.  Right now i could use only one
> interface i.e TSEC ?. Can anyone shed some light on this.
> 
> Thanks and Regards
> sivam
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
> Project Admins to receive an Apple iPod Mini FREE for your judgement on
> who ports your project to Linux PPC the best. Sponsored by IBM.
> Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>