From: Thomas Lange <thomas@corelatus.se>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] DB1000 Little-Endian U-Boot
Date: Mon, 04 Oct 2004 23:43:23 +0200 [thread overview]
Message-ID: <4161C3FB.5080407@corelatus.se> (raw)
In-Reply-To: <4161B222.1090906@ieee.org>
I guess you have changed TEXT_BASE to 0xbec00000?
When you use the S8 switch, you swap the two boot flashes.
This means that the boot flash that was at 0xbec00000
now appears at 0xbfc00000.
So, you have to compile u-boot with TEXT_BASE at
0xbfc00000 to make this work.
/Thomas
Charles Eidsness wrote:
> Hi All,
>
> I would like to use u-boot on my DB1000 card (with an AMD Au1000
> processor) in little endian mode. After a little bit of playing around I
> have gotten it to compile, load in to the parameter FLASH and run from
> the Yamon prompt, i.e. go bec00000. But, when I switch to boot
> completely from u-boot in the parameter flash (switch S8) the card just
> hangs. Does anyone have any ideas?
>
> Thanks,
> Charles
prev parent reply other threads:[~2004-10-04 21:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1096821864.3883.11.camel@sex-machine.chi.ldsys.net>
[not found] ` <20041004180726.GA21448@linux-mips.org>
2004-10-04 20:27 ` [U-Boot-Users] DB1000 Little-Endian U-Boot Charles Eidsness
2004-10-04 21:43 ` Thomas Lange [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4161C3FB.5080407@corelatus.se \
--to=thomas@corelatus.se \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox