From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andrew F. Davis <afd@ti.com>
Date: Wed, 8 May 2019 17:53:46 -0400
Subject: [U-Boot] [PATCH 07/18] configs: am65x_hs_evm_defconfig: Enable
 I2C support
In-Reply-To: <20190508213751.23179-8-dannenberg@ti.com>
References: <20190508213751.23179-1-dannenberg@ti.com>
 <20190508213751.23179-8-dannenberg@ti.com>
Message-ID: <419147d0-e053-97e6-e071-e1a8cb5ad2da@ti.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 5/8/19 5:37 PM, Andreas Dannenberg wrote:
> Enable I2C via driver model as well as the associated set of U-Boot
> commands to allow us interacting with various I2C slave devices.
> 
> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
> ---
>  configs/am65x_hs_evm_a53_defconfig | 4 ++++
>  configs/am65x_hs_evm_r5_defconfig  | 4 ++++

Thanks for not forgetting HS :)

For all the _hs defconfig changes in this series:

Acked-by: Andrew F. Davis <afd@ti.com>

>  2 files changed, 8 insertions(+)
> 
> diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig
> index 7af0046ee3..cebfbb93d9 100644
> --- a/configs/am65x_hs_evm_a53_defconfig
> +++ b/configs/am65x_hs_evm_a53_defconfig
> @@ -33,6 +33,7 @@ CONFIG_SPL_REMOTEPROC=y
>  CONFIG_SPL_YMODEM_SUPPORT=y
>  CONFIG_CMD_ASKENV=y
>  # CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_REMOTEPROC=y
>  # CONFIG_CMD_SETEXPR is not set
> @@ -56,6 +57,9 @@ CONFIG_CLK_TI_SCI=y
>  CONFIG_DMA_CHANNELS=y
>  CONFIG_TI_K3_NAVSS_UDMA=y
>  CONFIG_TI_SCI_PROTOCOL=y
> +CONFIG_DM_I2C=y
> +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
> +CONFIG_SYS_I2C_OMAP24XX=y
>  CONFIG_DM_MAILBOX=y
>  CONFIG_K3_SEC_PROXY=y
>  CONFIG_DM_MMC=y
> diff --git a/configs/am65x_hs_evm_r5_defconfig b/configs/am65x_hs_evm_r5_defconfig
> index 8d5d3590b2..6977cd72a6 100644
> --- a/configs/am65x_hs_evm_r5_defconfig
> +++ b/configs/am65x_hs_evm_r5_defconfig
> @@ -37,6 +37,7 @@ CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_ASKENV=y
>  # CONFIG_CMD_FLASH is not set
>  CONFIG_CMD_GPT=y
> +CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_REMOTEPROC=y
>  # CONFIG_CMD_SETEXPR is not set
> @@ -60,6 +61,9 @@ CONFIG_CLK_TI_SCI=y
>  CONFIG_TI_SCI_PROTOCOL=y
>  CONFIG_DM_GPIO=y
>  CONFIG_DA8XX_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
> +CONFIG_SYS_I2C_OMAP24XX=y
>  CONFIG_DM_MAILBOX=y
>  CONFIG_K3_SEC_PROXY=y
>  CONFIG_MISC=y
>