From: Andrew Wozniak <awozniak@mc.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Parallel Flash devices and FLASH_CFI_X8X16
Date: Fri, 10 Dec 2004 12:10:45 -0500 [thread overview]
Message-ID: <41B9D895.2090204@mc.com> (raw)
Hello everyone,
I'v been making progress on our port to a custom PPC440GX board. We
want to use the CFI driver for all U-Boot Flash operations.
Our board design uses 2 Intel 16-bit wide StrataFlash chips wired in
"parallel". But with the following defines in place, flash_init()
crashes (attachment).
#define CFG_FLASH_CFI
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_PROTECTION
None of the U-Boot docs or source code describe a parallel chip
configuration, but the flash_cfi.h history entry does suggest its
support: 01/22/2004 - Write performance enhancements for parallel chips
The source also checks the status of info->interface for a value of
FLASH_CFI_X8X16. I have not yet tried setting this "interface" value.
If anyone can suggest any other settings that I should be pay attention
to, please advise.
Thank you, Andy
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: crash.txt
Url: http://lists.denx.de/pipermail/u-boot/attachments/20041210/bf312fb9/attachment.txt
reply other threads:[~2004-12-10 17:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41B9D895.2090204@mc.com \
--to=awozniak@mc.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox