From mboxrd@z Thu Jan 1 00:00:00 1970 From: HoJin Date: Sat, 11 Dec 2004 11:38:36 +0900 Subject: [U-Boot-Users] [PATCH] BUGFIX: serial setting for kgdb Message-ID: <41BA5DAC.9000008@yahoo.co.kr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, KGDB_SMC_INDEX must be used as the index for brg_map, but it is used direclty. (compared with function serial_init) So it does not work properly. I have tested it and it works fine. I noticed the same problem with 'serial_scc.c', but I could not test it yet. Patch for only for 'serial_smc.c' is attached. Index: cpu/mpc8260/serial_smc.c =================================================================== --- cpu/mpc8260/serial_smc.c (revision 65) +++ cpu/mpc8260/serial_smc.c (working copy) @@ -360,10 +360,10 @@ /* Set up the baud rate generator. */ #if defined(CONFIG_KGDB_USE_EXTC) - m8260_cpm_extcbrg(KGDB_SMC_INDEX, speed, + m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed, CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL); #else - m8260_cpm_setbrg(KGDB_SMC_INDEX, speed); + m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed); #endif /* Make the first buffer the only buffer. -- Hojin