[U-Boot-Users] Re: Trouble on PXA w/kernel command-line

craig vanderborgh
2004-12-15T02:36:16Z

Wolfgang Denk <wd <at> denx.de> writes:

>
> In message <41BF5D9D.50603 <at> voxware.com> you wrote:
> >
> > Yes, it is most definitely set. Could you possibly describe how
> > command-line passing is *supposed* to work and then I think I can fix it...
>
> See setup_commandline_tag() and do_bootm_linux() in
> lib_arm/armlinux.c
>
>
> Best regards,
>
> Wolfgang Denk
>

Hello Wolfgang:

It turns out that u-boot's handling of the command line is PERFECT. Absolutely
spot-on. The trouble was on the receiving end of the command line in my kernel.
My machine descriptor (in my processor setup C code) looked like this:

MACHINE_START(BITSYX, "Voxware/ADS BitsyX Lite")
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
MAPIO(bitsyx_map_io)
INITIRQ(bitsyx_init_irq)
MACHINE_END

It lacked the "BOOT_PARAMS" macro that tells the kernel where in memory to look
for the command line. Once I added a "BOOT_PARAMS" to my MACHINE descriptor
everything works perfectly:

MACHINE_START(BITSYX, "Voxware/ADS BitsyX Lite")
BOOT_PARAMS(0xa0000100)
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
MAPIO(bitsyx_map_io)
INITIRQ(bitsyx_init_irq)
MACHINE_END

I am sorry to bother you with such trivialities, but they are UNDOCUMENTED and
not at all obvious to people who don't regularly do Linux kernel work - like
myself.

Thanks a MILLION.

Regards,
craig