From mboxrd@z Thu Jan  1 00:00:00 1970
From: mike <mikelee@avantwave.com>
Date: Thu, 30 Dec 2004 10:42:03 +0800
Subject: [U-Boot-Users] MX1ADS board
Message-ID: <41D36AFB.1060002@avantwave.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear all

    I am using CVS u-boot on mx1ads with syncflash. But i found that the 
default board config load the kernel from 0x8800 0000, which is ram 
address.
    What i am going to do is to port u-boot to MXL platform with AMD NOR 
flash, Do anyone try that before?
    Also, i see that there is usbtty on OMAP platform, MX1/MXL is also 
embedded a usb1.1 client port. Could anyone please tell me how to start 
to port on MX1/MXL? or anyone try that before?

    I am new to this place, if i make any things wrong, please tell me.
    Thanks for helping
best regard
Mike,Lee