* [U-Boot-Users] MX1ADS board
@ 2004-12-30 2:42 mike
2004-12-30 9:43 ` Steven Scholz
0 siblings, 1 reply; 2+ messages in thread
From: mike @ 2004-12-30 2:42 UTC (permalink / raw)
To: u-boot
Dear all
I am using CVS u-boot on mx1ads with syncflash. But i found that the
default board config load the kernel from 0x8800 0000, which is ram
address.
What i am going to do is to port u-boot to MXL platform with AMD NOR
flash, Do anyone try that before?
Also, i see that there is usbtty on OMAP platform, MX1/MXL is also
embedded a usb1.1 client port. Could anyone please tell me how to start
to port on MX1/MXL? or anyone try that before?
I am new to this place, if i make any things wrong, please tell me.
Thanks for helping
best regard
Mike,Lee
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] MX1ADS board
2004-12-30 2:42 [U-Boot-Users] MX1ADS board mike
@ 2004-12-30 9:43 ` Steven Scholz
0 siblings, 0 replies; 2+ messages in thread
From: Steven Scholz @ 2004-12-30 9:43 UTC (permalink / raw)
To: u-boot
Dear mike,
> I am using CVS u-boot on mx1ads with syncflash. But i found that the
> default board config load the kernel from 0x8800 0000, which is ram
> address.
So what? Of course $loadaddr should be in RAM. What exactly is your problem?
> What i am going to do is to port u-boot to MXL platform with AMD NOR
> flash, Do anyone try that before?
Sure.
> I am new to this place, if i make any things wrong, please tell me.
Welcome! But yes, we will! ;-)
Just make sure to RTFM first.
--
Steven
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-12-30 9:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-12-30 2:42 [U-Boot-Users] MX1ADS board mike
2004-12-30 9:43 ` Steven Scholz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox