From mboxrd@z Thu Jan  1 00:00:00 1970
From: Steven Scholz <steven.scholz@imc-berlin.de>
Date: Thu, 30 Dec 2004 10:43:08 +0100
Subject: [U-Boot-Users] MX1ADS board
In-Reply-To: <41D36AFB.1060002@avantwave.com>
References: <41D36AFB.1060002@avantwave.com>
Message-ID: <41D3CDAC.30102@imc-berlin.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear mike,

>    I am using CVS u-boot on mx1ads with syncflash. But i found that the 
> default board config load the kernel from 0x8800 0000, which is ram 
> address.
So what? Of course $loadaddr should be in RAM. What exactly is your problem?

>    What i am going to do is to port u-boot to MXL platform with AMD NOR 
> flash, Do anyone try that before?
Sure.

>    I am new to this place, if i make any things wrong, please tell me.
Welcome! But yes, we will! ;-)

Just make sure to RTFM first.

--
Steven