From mboxrd@z Thu Jan  1 00:00:00 1970
From: Hinko Kocevar <hinko@iskramedical.si>
Date: Thu, 20 Jan 2005 15:50:39 +0100
Subject: [U-Boot-Users] BDI2000 with pxa255
Message-ID: <41EFC53F.9010304@iskramedical.si>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,

I've connected bdi2000 to the host computer and successfully updated 
firmware and managed to telnet to the bdi. I also adapted cfg file for 
my platform (KK trizeps2). When I power up the target device I get this 
error:
...
- TARGET: target will be restarted in 10 sec
- TARGET: processing reset request
- TARGET: BDI asserts RESET and TRST
- TARGET: BDI removed TRST
- TARGET: Bypass check: 0x000000001 => 0x00000000
- TARGET: JTAG exists check failed
# TARGET: resetting target failed
# JTAG: communication with target failed
- TARGET: target will be restarted in 10 sec
...

Can somebody point me to the possible causes for this behaviour?

PS. Is it mandatory to supply ~RESET pin to BDI? Can I just keep it in 
reset with a jumper closed? Trizeps2 is lacking this pin on JTAG connector.

best regards,
hk

-- 
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU

	"A? r?n"	|	[Analects XII:22]