From mboxrd@z Thu Jan  1 00:00:00 1970
From: Hinko Kocevar <hinko@iskramedical.si>
Date: Mon, 24 Jan 2005 16:46:07 +0100
Subject: [U-Boot-Users] BDI2000 with pxa255
In-Reply-To: <1106234112.11409.4.camel@mbmatejdebian.ultra.si>
References: <41EFC53F.9010304@iskramedical.si> <1106234112.11409.4.camel@mbmatejdebian.ultra.si>
Message-ID: <41F5183F.6060103@iskramedical.si>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Matej Kupljen wrote:
> Hi
> 
> 
>>Can somebody point me to the possible causes for this behaviour?
> 
> 
> Reset line.
> 
> 
>>PS. Is it mandatory to supply ~RESET pin to BDI? 
> 
> 
> Yes.
> BDI2000 uses ~RESET to upload the debug handler into the mini IC.
> See figure 10-11 in the Intel Xscale Microarchitecture User's Manual.
> 

Ok, I've found the reset pin on PXA255 and wired it to correct pin on 
BDI2000, but still the same error appears :(.
Should there be any other pullup/pulldown resistors on other JTAG lines 
besides reset or does BDI hava them 'built in'?

regards,
hk

-- 
hinko <dot> kocevar <at> iskramedical <dot> si
Hinko Kocevar, embedded systems developer
Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU

	"A? r?n"	|	[Analects XII:22]