From mboxrd@z Thu Jan 1 00:00:00 1970 From: Clemens Koller Date: Fri, 28 Jan 2005 11:55:41 +0100 Subject: [U-Boot-Users] duplicate environment variables in U-Boot? Message-ID: <41FA1A2D.9080305@anagramm.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello! Several times, I ran into troubles with the command parsing of U-Boot. Sometimes - especially if I had to do some simple corrections (backspace only, no delete, no cursor movements) the 'set xxx yyy) command doesn't get recognized. Sometimes some commands like 'run nfsboot' gets ignored - especially after a long time doing nothing (waiting on the prompt for i.e. >15min) (no bs used or any other compilcated editing was used). I just get another prompt. If I type it again, it works fine. And, finally, due to some of these problems, I guess, I got now a duplicate environment variable: -----8<--------------------------------------------------------------- U-Boot 1.1.2 (Oct 28 2004 - 14:02:56) Freescale PowerPC Core: E500, Version: 2.0, (0x80200020) System: 8540, Version: 2.0, (0x80300020) Clocks: CPU: 825 MHz, CCB: 330 MHz, DDR: 165 MHz, LBC: 82 MHz L1 D-cache 32KB, L1 I-cache 32KB enabled. Board: MicroSys PM854 PCI1: 32 bit, 66 MHz (compiled) ... => pri ... stdin=serial stdout=serial stderr=serial bootfile=/mlinux.UB.T1 bootfile=/vmlinux.UB.T1 Environment size: 1084/8188 bytes => -----8<--------------------------------------------------------------- Any ideas, fixes, suggestions? -- Clemens Koller _______________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Str. 45/1 81379 Muenchen Germany http://www.anagramm.de Phone: +49-89-741518-50 Fax: +49-89-741518-19