Re: [PATCH 2/3] sunxi: H616: remove default AXP305 selection

[Jaehoon Chung <jh80.chung@gmail.com>]

On 11/14/23 10:31, Andre Przywara wrote:
> The original H616 devices released about three years ago were typically
> paired with an X-Powers AXP305 PMIC. Newer devices uses the smaller
> AXP313, and there seem to be far more systems with this PMIC around now.
> 
> Remove the default AXP305 selection for the H616 SoC from the Kconfig,
> and move the PMIC selection into the board defconfig files instead.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  configs/orangepi_zero2_defconfig | 1 +
>  configs/x96_mate_defconfig       | 1 +
>  drivers/power/Kconfig            | 1 -
>  3 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig
> index f13735e91c7..127cf9e365a 100644
> --- a/configs/orangepi_zero2_defconfig
> +++ b/configs/orangepi_zero2_defconfig
> @@ -19,6 +19,7 @@ CONFIG_SYS_I2C_SPEED=400000
>  CONFIG_SPI_FLASH_MACRONIX=y
>  CONFIG_PHY_REALTEK=y
>  CONFIG_SUN8I_EMAC=y
> +CONFIG_AXP305_POWER=y
>  CONFIG_SPI=y
>  CONFIG_USB_EHCI_HCD=y
>  CONFIG_USB_OHCI_HCD=y
> diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig
> index 318951e19c2..e805e0952b3 100644
> --- a/configs/x96_mate_defconfig
> +++ b/configs/x96_mate_defconfig
> @@ -18,6 +18,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
>  CONFIG_SYS_I2C_MVTWSI=y
>  CONFIG_SYS_I2C_SLAVE=0x7f
>  CONFIG_SYS_I2C_SPEED=400000
> +CONFIG_AXP305_POWER=y
>  CONFIG_SUPPORT_EMMC_BOOT=y
>  CONFIG_USB_EHCI_HCD=y
>  CONFIG_USB_OHCI_HCD=y
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 2395720c99c..33b8bc1214d 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -56,7 +56,6 @@ choice
>  	depends on ARCH_SUNXI
>  	default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
>  	default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
> -	default AXP305_POWER if MACH_SUN50I_H616
>  	default AXP818_POWER if MACH_SUN8I_A83T
>  	default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S
>