From: Jonas Dietsche <maillist@fsforth.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] booting from USB
Date: Fri, 04 Feb 2005 09:10:17 +0100 [thread overview]
Message-ID: <42032DE9.4020707@fsforth.de> (raw)
> I think you must be doing something wrong.
Probably...
>
> Which exact commands did you use to put the image into the boot
> partition?
dd if=/tftpboot/uImage of=/dev/sda1
2234+1 records in
2234+1 records out
1144016 bytes transferred in 0.585176 seconds (1954995 bytes/sec)
A9M9750 # usb reset
(Re)start USB...
USB: scanning bus for devices... 2 USB Devices found
A9M9750 # usb scan
Scan for storage device:
scanning bus for storage devices...
Device 0: Vendor: USB 2.0 Prod.: Mobile Disk Rev: 2.00
Type: Removable Hard Disk
Capacity: 125.0 MB = 0.1 GB (256000 x 512)
A9M9750 # usbboot 10000 0:1
Loading from USB device 0, partition 1: Name: usbda1
Type: U-Boot
First Block: 32, # of blocks: 10208, Block Size: 512
** Bad Magic Number **
And with usb read it looks like:
A9M9750 # usb read 10000 20 8BB
USB read: device 0 block # 32, count 2235 ...
...............................................................................................................
2235 blocks read: OK
A9M9750 # bootm
## Booting image at 00010000 ...
Image Name: Linux-2.6.10-fs1
Created: 2005-02-02 13:23:01 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1144056 Bytes = 1.1 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
Starting kernel ...
Regards,
Jonas
next reply other threads:[~2005-02-04 8:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-04 8:10 Jonas Dietsche [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-02-01 16:55 [U-Boot-Users] booting from USB Jonas Dietsche
2005-02-01 18:38 ` Wolfgang Denk
2005-02-02 15:15 ` Jonas Dietsche
2005-02-02 17:10 ` Wolfgang Denk
2005-02-03 11:27 ` Jonas Dietsche
2005-02-03 12:02 ` Wolfgang Denk
2005-02-03 15:12 ` Jonas Dietsche
2005-02-03 15:24 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42032DE9.4020707@fsforth.de \
--to=maillist@fsforth.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox