* [U-Boot-Users] MXLADS porting
@ 2005-02-07 2:54 mike
0 siblings, 0 replies; only message in thread
From: mike @ 2005-02-07 2:54 UTC (permalink / raw)
To: u-boot
Dear all
I am trying to port mxlads board,and i copy all the files from
board/mx1ads/ and include/configs/mx1ads.h. But i can not see the u-boot
banner in minicom.
The difference between MX1ADS and MXLADS should be very small, As i
know embedded sram is reduced in MXL processor and different flash are
used, I also looked up motorola BSP bootloader, the SDRAM setting should
be the same.
Does anyone try MXLADS before, or anyone can suggest me a way to debug?
best regard
Mike,Lee
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-02-07 2:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-02-07 2:54 [U-Boot-Users] MXLADS porting mike
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox