From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hinko Kocevar Date: Mon, 07 Feb 2005 13:55:36 +0100 Subject: [U-Boot-Users] bdi2000 reset target failed Message-ID: <42076548.6060407@iskramedical.si> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, After good start I'm back to square one in my debugging session. After a while and with help on this list I managed to get target resetted and did some tests. After a while the same problem appeared - BDI2000 can not reset target and fails with message: - TARGET: processing reset request - TARGET: BDI asserts RESET and TRST - TARGET: BDI removed TRST - TARGET: Bypass check: 0x000000001 => 0x00FFFFFF - TARGET: JTAG exists check failed # TARGET: resetting target failed # JTAG: communication with target failed - TARGET: target will be restarted in 10 sec I'm pretty sure that JTAG cable for first target is OK, since it was working a while ago, and I also tested BDI2000 with another PXA target and the same error emerges there (with this target I have direct connection between BDI2000 and target JTAG). Any help is appreciated... regards, hk -- hinko kocevar iskramedical si Hinko Kocevar, embedded systems developer Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU "A? r?n" | [Analects XII:22]