[U-Boot-Users] unhandled ethernet wakeup interrupt in 405 ethernet driver

[Matthias Fuchs <matthias.fuchs@esd-electronics.com>]

Hi,

I noticed a networks problem with some of our 405EP platforms (u-boot 
config: PLU405). When doing tftp u-boot runs into an endless interrupt 
loop of the ethernet wakeup interrupt (VECNUM_EWU0).

So why is the wakeup interrupt enabled in 405gp_enet.c in general? The 
interrupt handler enetInt() does not care about this interrupt source at 
all. So when it occurs we end up in an interrupt loop. I found no hint 
about how to reset this interrupt in the 405EP manual.

When I do not install a handler on the wakeup interrupt source (EWU0) 
everything is fine. This is my current workaround.

The current 405 linux ethernet driver also does not attach to this 
interrupt.

I am astonished about two things:

1) The installation of the enetInt() handler for the wakeup interrupt is 
only done for 405EP platforms in ppc_4xx_eth_initialize():

#if defined(CONFIG_405EP)
			/* 405EP has one EWU interrupt */
			irq_install_handler (VECNUM_EWU0,
					     (interrupt_handler_t *) enetInt,
					     dev);
#endif

But it is not done for 405EP platforms in ppc_4xx_eth_init():

#if !defined(CONFIG_405EP)
		/* 405EP has one EWU interrupt */
		irq_install_handler (VECNUM_EWU0 + (hw_p->devnum * 2),
				     (interrupt_handler_t *) enetInt, dev);
#endif

This seems to be strange at all.

I suppose that no one is using the wakeup mechanism and so I propose to 
completely remove the wakeup stuff!


2) Why the hell do we get ethernet wakeup interrupts on some of our 
405EP boards :-(



So can we get rid of installing a wakeup interrupt that even does not 
handle the interrupt? If yes I will submit a patch.

Matthias

-- 
-------------------------------------------------------------------------

                             _/_/_/_/   Matthias Fuchs
                            _/_/_/_/   Dipl.-Ing.
                           _/_/_/_/   matthias.fuchs at esd-electronics.com

       _/_/_/   _/_/_/_/_/_/_/      esd electronic system design gmbh
     _/   _/  _/             _/    Vahrenwalder Str. 207
    _/   _/    _/_/_/   _/   _/   D-30165 Hannover
    _/             _/  _/   _/   Phone: +49-511-37298-0
     _/_/_/_/_/_/_/   _/_/_/    Fax:   +49-511-37298-68

-------------------------------------------------------------------------