From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peter Asemann <peter.asemann@web.de>
Date: Tue, 17 May 2005 18:27:46 +0200
Subject: [U-Boot-Users] Not primarily u-boot related problem with Flash-RAM
In-Reply-To: <20050513161424.CD404C1512@atlas.denx.de>
References: <20050513161424.CD404C1512@atlas.denx.de>
Message-ID: <428A1B82.7050302@web.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> Are you sure that the flashes ever worked?  One  typical  problem  is
> that  it  seems quite natural to connect the D0 pin of the flash chip
> to the D0 pin of the data bus, etc. - which is wrong, since  for  the
> flash chip D0 is the LSB, but on PowerPC bit 0 is the MSB...

Argh... in fact, if I mirror the command sequence, the flash works 
(reacts to auto select command sequence).

Is there a "mirrored command sequences software package" to use 
mis-layouted hardware of that kind?

Best regards,

Peter Asemann