[U-Boot-Users] [PATCH] add OpenGear CM4116/CM4148 board support

[U-Boot-Users] [PATCH] add OpenGear CM4116/CM4148 board support

[Greg Ungerer]

Hi All,

Attached is a patch that adds support to u-boot for the OpenGear
CM4116 and CM4148 serial port console manager boards. They are
built around the KS8695P CPU, with 16 or 48 serial ports,
32MB RAM, and 16MB NOR flash.

This patch was originally generated against u-boot 1.1.1.

Regards
Greg





-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: u-boot.cm41xx.patch
Url: http://lists.denx.de/pipermail/u-boot/attachments/20050517/c23f0a32/attachment.txt 

[U-Boot-Users] [PATCH] add OpenGear CM4116/CM4148 board support

[Wolfgang Denk]

In message <4289F7DE.3000904@moreton.com.au> you wrote:
>
> Attached is a patch that adds support to u-boot for the OpenGear
> CM4116 and CM4148 serial port console manager boards. They are
> built around the KS8695P CPU, with 16 or 48 serial ports,
> 32MB RAM, and 16MB NOR flash.
> 
> This patch was originally generated against u-boot 1.1.1.

Same again: too old code, sorry. Please eliminate the use of the  old
CONFIG_INIT_CRITICAL  stuff,  add  entries for CHANGELOG, MAINTAINERS
and CREDITS and resubmit.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"We all agree on the necessity of compromise. We just can't agree  on
when it's necessary to compromise."
                - Larry Wall in  <1991Nov13.194420.28091@netlabs.com>

[U-Boot-Users] [PATCH] add OpenGear CM4116/CM4148 board support

[Greg Ungerer]

Hi Wolfgang,

Revised patch for OpenGear cm4116 and CM4148 board support.
This is patched against current CVS code.

Regards
Greg
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: u-boot.cm41xx.patch
Url: http://lists.denx.de/pipermail/u-boot/attachments/20050520/3863b228/attachment.txt