* [U-Boot-Users] fec ethernet problem
@ 2005-05-26 13:01 Yigit Can
0 siblings, 0 replies; only message in thread
From: Yigit Can @ 2005-05-26 13:01 UTC (permalink / raw)
To: u-boot
Hello,
Until today we are using our 852T module in 10M ethernet mode. But now
we are modifying our hardware to support 100M ethernet.
The uboot is configured with the
#define CONFIG_FEC_ENET 1
#define CONFIG_FEC_ETH 1
#define FEC_ENET 1
#define FEC_INTERRUPT SIU_LEVEL5
#define CFG_DISCOVER_PHY 1
and this configuration is working on the
10M FD/HD ANEG mode
but now we have changed the configuration hard wired pins of the
AMD79c874vc phy to use
All capabilities ANEG mode
but then uboot fails to use ethernet
What can we do?
Best Regards
Yigit Can
-------------- next part --------------
A non-text attachment was scrubbed...
Name: yigit.can.vcf
Type: text/x-vcard
Size: 148 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20050526/ee484f14/attachment.vcf
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-05-26 13:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-26 13:01 [U-Boot-Users] fec ethernet problem Yigit Can
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox