From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yigit Can Date: Thu, 26 May 2005 16:01:35 +0300 Subject: [U-Boot-Users] fec ethernet problem Message-ID: <4295C8AF.4090306@karel.com.tr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, Until today we are using our 852T module in 10M ethernet mode. But now we are modifying our hardware to support 100M ethernet. The uboot is configured with the #define CONFIG_FEC_ENET 1 #define CONFIG_FEC_ETH 1 #define FEC_ENET 1 #define FEC_INTERRUPT SIU_LEVEL5 #define CFG_DISCOVER_PHY 1 and this configuration is working on the 10M FD/HD ANEG mode but now we have changed the configuration hard wired pins of the AMD79c874vc phy to use All capabilities ANEG mode but then uboot fails to use ethernet What can we do? Best Regards Yigit Can -------------- next part -------------- A non-text attachment was scrubbed... Name: yigit.can.vcf Type: text/x-vcard Size: 148 bytes Desc: not available Url : http://lists.denx.de/pipermail/u-boot/attachments/20050526/ee484f14/attachment.vcf