[U-Boot-Users] Problem starting u-boot on Xilinx V2P

[Thorsten Lueck <T.Lueck@IfEN.com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

I have a own board with an Virtex V2Pro (V2P30) an want to boot u-boot
on the PPC.
Starting from the demo-design for the ml300 demo board, I managed to
compile u-boot 1.1.1 (1.1.2 fails when running the tcl-script with EDK
7.1) and could download and run u-boot on my PPC. However, u-boot stops
after printing

U-Boot 1.1.1 (Jul  5 2005 - 16:50:28)


### No HW ID - assuming ML300
DRAM:  128 MB


I get no further output afterwards. Another strange thing is, that I
only have 32MB RAM on board but not 128MB as the ml300 has. However, I
could not find any hardcoded RAM size in the source files for the ml300.

Does anybody has an idea? I found the comment :

/*
 * WARNING: this code looks "cleaner" than the PowerPC version, but
 * has the disadvantage that you either get nothing, or everything.
 * On PowerPC, you might see "DRAM: " before the system hangs - which
 * gives a simple yet clear indication which part of the
 * initialization if failing.
 */


in the ./lib_i386/board.c, however, there is no appropriate warning in
static int init_func_ram (void)
of ./lib_ppc/board.c

Thanks in advance,

Thorsten L?ck
- --
IfEN - Gesellschaft f?r Satellitennavigation mbH

  Dipl. Ing. Thorsten L?ck
  Tel.:  +49 8121 2238-25
  Fax :  +49 8121 2238-11
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)

iD8DBQFCyqyuQDwjNlk95KYRAmuIAJsFYHOlYn1+MJzg8tNZ1+sJQYhOFwCg5LnR
2HsWS999Jatd1N8w+3kjArg=
=kltH
-----END PGP SIGNATURE-----