From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thorsten Lueck Date: Wed, 06 Jul 2005 08:52:22 +0200 Subject: [U-Boot-Users] Problem starting u-boot on Xilinx V2P In-Reply-To: References: <42CAACB0.50101@IfEN.com> Message-ID: <42CB7FA6.3040905@IfEN.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Cedric VINCENT wrote: >>Another strange thing is, that I >>only have 32MB RAM on board but not 128MB as the ml300 has. However, I >>could not find any hardcoded RAM size in the source files for the ml300. > > Take a look into board/xilinx/ml300/ml300.c, it *is* hardcoded ! Indeed - that was the problem - I greped for the size (in hex and dec) but _not_ for a formular ;-) > As Wolgang said, "you cannot just use a configuration for one board > and expect it to work on a different board". But if you change your > config file and U-Boot still hangs after "Now running in RAM at ....." > (don't forget to #define DEBUG) it may be a U-Boot incompatibility > with some (new) version of GCC. If so, please mail me ! Well, probably I can - changing the size to the real size (which is 32MB instead of 128) - u-boot boots up to the prompt. Probably some memory test addressed memory above 32MB. So it works now. Regarding the version of gcc, I use ppc_405-gcc (GCC) 3.3.1 (MontaVista 3.3.1-3.0.10.0300532 2003-12-24) Thanks for your helpfull hint! Best regards, Thorsten L?ck - -- IfEN - Gesellschaft f?r Satellitennavigation mbH Dipl. Ing. Thorsten L?ck Tel.: +49 8121 2238-25 Fax : +49 8121 2238-11 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (GNU/Linux) iD8DBQFCy3+kQDwjNlk95KYRAiMaAKDgp7miMmBTrdYvuQiTmv22J0ChhQCgr2bs +nJ4OJ7toS1avTRJ8YxkZp4= =cSLW -----END PGP SIGNATURE-----