From: Travis B. Sawyer <tsawyer+u-boot@sandburst.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] PATCH: Add sandburst metrobox board support [1/3]
Date: Tue, 12 Jul 2005 16:52:09 -0400 [thread overview]
Message-ID: <42D42D79.5060807@sandburst.com> (raw)
[Note: My previous submission was rejected due to size]
This patch adds the Sandburst Metrobox and Sandburst Karef Boards.
Both are PPC440GX based, direct peripheral bus connected compact flash,
dallas rtc, write protected eeprom (strappings and ethernet MAC address).
EMAC 2 is the management ethernet interface, EMAC 3 goes to a board
to board connector.
These boards are reference designs for the Sandburst HiBEAM chipset.
See http://www.sandburst.com for more board information (predominately
marketing speak).
This patch is against source forge cvs 12July2005, at approximately 0900
EDT.
CHANGELOG:
* Patch by Travis B. Sawyer, 12 Jul 2005:
Add Sandburst Metrobox and Sandburst Karef board support packages.
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Best regards,
Travis Sawyer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sandburst_metrobox.patch.bz2
Type: application/x-bzip2
Size: 26017 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20050712/bec94ddb/attachment.bin
next reply other threads:[~2005-07-12 20:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-12 20:52 Travis B. Sawyer [this message]
2005-08-15 12:18 ` [U-Boot-Users] PATCH: Add sandburst metrobox board support [1/3] Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2005-07-12 20:49 Travis B. Sawyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42D42D79.5060807@sandburst.com \
--to=tsawyer+u-boot@sandburst.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox