public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Detlef Vollmann <dv@vollmann.ch>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] DM9000 on PXA
Date: Thu, 11 Aug 2005 00:39:16 +0200	[thread overview]
Message-ID: <42FA8214.73742DE7@vollmann.ch> (raw)
In-Reply-To: 42FA5C69.3050009@iskramedical.si

Hinko Kocevar wrote:
> I'm half way (probably less) through porting u-boot to trizeps3 K&K cpu module
> that has PXA255, 32MB flash, 64MB sdram, OTG TD242Lp, DM9000 ETh and UCB1400
> onboard.
> 
> I'm stuck with DM9000 ethernet chip. Every packet that is recieved by the chip
> is supposed to be errornous. My DM9000 is at 0x08000000 and its IO port is at
> 0x08000000, while data port is at 0x08008000 (confirmed and working under
> supplied bootloader and linux).

> Any comments?
We use U-Boot with our Colibri module (which is somewhat compatible
to the Trizeps IV).
The only relevant change we did in the DM9000 driver was:
Index: drivers/dm9000x.c
===================================================================
RCS file: /source/toradex/colibri/u-boot-1.1.2/drivers/dm9000x.c,v
retrieving revision 1.1.1.1
retrieving revision 1.5
diff -u -r1.1.1.1 -r1.5
--- drivers/dm9000x.c   30 Mar 2005 22:10:10 -0000      1.1.1.1
+++ drivers/dm9000x.c   12 May 2005 10:02:27 -0000      1.5
@@ -317,7 +323,7 @@
 
        /* Activate DM9000 */
        DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); 
/* RX enable */
-       DM9000_iow(DM9000_IMR, IMR_PAR);        /* Enable TX/RX
interrupt mask */
+       DM9000_iow(DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);    /*
Enable TX/RX interrupt mask */
        i = 0;
        while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */
                udelay(1000);
@@ -436,6 +442,9 @@
        u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
        u16 RxStatus, RxLen = 0;
        u32 tmplen, i;
+#ifdef CONFIG_DM9000_USE_32BIT
+       u32 tmpdata;
+#endif
 
        /* Check packet ready or not */
        DM9000_ior(DM9000_MRCMDX);      /* Dummy read */

You can find all the changes from our website:
http://www.toradex.com/colibri_downloads/Linux/colibri-bsp-1.1/src/u-boot-1.1.2-col.tar.gz

HTH
 Detlef

-- 
Detlef Vollmann   vollmann engineering gmbh
Linux and C++ for Embedded Systems    http://www.vollmann.ch/
Linux for PXA270 Colibri module: www.toradex.com/e/products.html

  reply	other threads:[~2005-08-10 22:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-08-10 19:58 [U-Boot-Users] DM9000 on PXA Hinko Kocevar
2005-08-10 22:39 ` Detlef Vollmann [this message]
2005-08-11 23:47   ` Hinko Kocevar
2005-08-12 10:22     ` Detlef Vollmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=42FA8214.73742DE7@vollmann.ch \
    --to=dv@vollmann.ch \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox