From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Schweigstill Date: Mon, 29 Aug 2005 11:29:13 +0200 Subject: [U-Boot-Users] Does U-Boot support IXDP425 ethernet downloading? In-Reply-To: <016801c5ac76$963792b0$27050a0a@jadechip.net> References: <016801c5ac76$963792b0$27050a0a@jadechip.net> Message-ID: <4312D569.10006@schweigstill.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Brian! Bryan Wu schrieb: > I can't find any code for IXP425 NPE. So can I use U-Boot to download image by ethernet? Take a look into include/configs/ixdp425.h and there you will see that CONFIG_EEPRO100 is enabled. Try make ixdp425_config You also have to check the settings in board/ixdp425. If you have a different harware configuration you should create your own configuration. Regards Andreas Schweigstill -- Dipl.-Phys. Andreas Schweigstill Schweigstill IT | Embedded Systems Schauenburgerstra?e 116, D-24118 Kiel, Germany Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436 Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/