From: Peter Ryser <peter.ryser@xilinx.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] Two System ACE CF fixes
Date: Mon, 26 Sep 2005 08:08:54 -0700 [thread overview]
Message-ID: <43380F06.1090009@xilinx.com> (raw)
Attached a patch that adds support for the 16-bit wide bus of System ACE
CF besides the existing support for the 8-bit wide bus.
The patch also sets the FORCECFGMODE bit in the control register when
the System ACE CF configuration controller is reset before reading a
sector. Without this bit set System ACE CF reconfigures an FPGA if the
CFGMODE pin is active whenever a sector is read.
The third hunk fixes a typo.
- Peter
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: sace.2005-09-26.patch
Url: http://lists.denx.de/pipermail/u-boot/attachments/20050926/5c97d7be/attachment.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: CHANGELOG
Url: http://lists.denx.de/pipermail/u-boot/attachments/20050926/5c97d7be/attachment-0001.txt
next reply other threads:[~2005-09-26 15:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-26 15:08 Peter Ryser [this message]
2005-09-26 16:43 ` [U-Boot-Users] [PATCH] Two System ACE CF fixes Jeff Angielski
2006-01-25 2:39 ` Peter Ryser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43380F06.1090009@xilinx.com \
--to=peter.ryser@xilinx.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox