From mboxrd@z Thu Jan  1 00:00:00 1970
From: Alan Casey <alan.casey5@mail.dcu.ie>
Date: Wed, 17 May 2006 13:22:43 +0000
Subject: [U-Boot-Users] Bad Magic Number - bootm
In-Reply-To: <20060516105723.81938.qmail@web30605.mail.mud.yahoo.com>
Message-ID: <4345459A0013B854@hawk.dcu.ie>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

>-- Original Message --
>From: Kaushik karandikar <kaushikkarandikar@yahoo.com>
>To: u-boot-users at lists.sourceforge.net
>Subject: [U-Boot-Users] Bad Magic Number - bootm
>Date: Tue, 16 May 2006 03:57:23 -0700 (PDT)
>
>
>      Hi All,
>             I am compiling uClinux for Phytec board with LPC2294 ARM7TDMI.
>      When I tried to use "bootm 0x80020000" (the linux   kernel image address
>in Flash).
>        It gave me the "Bad Magic Number".
>         
>      Could anyone tell me what was wrong ?I am new to this .
>    
>    Please Help me out.
>    
>    Thanks and Regards
>    Kaushik
>		
>---------------------------------
>Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates
>starting at 1?/min.

Hi,

  Make sure that you have used the 'mkimage' tool to encapsulate
  a compressed or uncompressed Linux kernel image with header 
  information, checksum etc. See the README file in your U-Boot
  distribution for details. e.g. for ARM Integrator platforms:
  
  mkimage -A arm -O linux -T kernel -C none -a 0x7fc0 -e 0x8000
          -n 'ARM Linux 2.6.x' -d linux-2.6.x.bin linux-2.6.x.img

  Regards,
  Alan.