[U-Boot-Users] Lite5200B support on U-Boot.

[U-Boot-Users] Lite5200B support on U-Boot.

[Txema Lopez]

Hi all,
In a couple of weeks we will recieve a Lite5200B for evaluation. Looking 
into the Lite5200B User Manual we have found that the board comes 
pre-loaded with a U-Boot version. Does anyone know if this U-Boot 
version source code is now available? Will it be?. Has the low-boot been 
ported to that board? We have found nothing about it in the U-Boot 
repository (searching for Lite5200B, we don't know if the board is known 
by other name).

TIA,

Jos? Mar?a L?pez,

[U-Boot-Users] Lite5200B support on U-Boot.

[Wolfgang Denk]

In message <436A3132.6020004@aotek.es> you wrote:
>
> In a couple of weeks we will recieve a Lite5200B for evaluation. Looking 
> into the Lite5200B User Manual we have found that the board comes 
> pre-loaded with a U-Boot version. Does anyone know if this U-Boot 
> version source code is now available? Will it be?. Has the low-boot been 

Obviously this is a question you should ask Freescale, not us.

Simply put: the source code MUST be  available,  or  Freescale  would
violate the GPL.

> ported to that board? We have found nothing about it in the U-Boot 
> repository (searching for Lite5200B, we don't know if the board is known 
> by other name).


Low-boot has been there for a long, long time. 

The plain old Lite board is supported  just  fine,  including  confi-
gurations with DDR RAM; changes for the Lite5200B should be minimal.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If in any problem you find yourself doing an immense amount of  work,
the answer can be obtained by simple inspection.

[U-Boot-Users] Lite5200B support on U-Boot.

[Ron Alder]

Txema Lopez wrote:

> Hi all,
> In a couple of weeks we will recieve a Lite5200B for evaluation. 
> Looking into the Lite5200B User Manual we have found that the board 
> comes pre-loaded with a U-Boot version. Does anyone know if this 
> U-Boot version source code is now available? Will it be?. 

When you get the board you will receive the source with the board or 
there will be instructions on how to get the source. If you have 
problems contact me.

Good luck with the board,

Ron Alder

[U-Boot-Users] Lite5200B support on U-Boot.

[Wolfgang Denk]

In message <436BA9B4.9040501@freescale.com> you wrote:
> 
> When you get the board you will receive the source with the board or 
> there will be instructions on how to get the source. If you have 
> problems contact me.

Any intentions to post updates here?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I am a computer. I am dumber than any human and smarter than any  ad-
ministrator.

[U-Boot-Users] Lite5200B support on U-Boot.

[Ron Alder]

Wolfgang Denk wrote:

>In message <436BA9B4.9040501@freescale.com> you wrote:
>  
>
>>When you get the board you will receive the source with the board or 
>>there will be instructions on how to get the source. If you have 
>>problems contact me.
>>    
>>
>
>Any intentions to post updates here?
>
>  
>
Yes, all updates will be posted here.

Regards,
Ron Alder