From: Zhen Wang <mailtojarod@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] TFTP times out?
Date: Thu, 10 Nov 2005 11:10:32 +0800 [thread overview]
Message-ID: <4372BA28.9040401@gmail.com> (raw)
Hi wd,
Yeah, I've read relevant topics in DULG and then revised my
configuration header file as following:
#define CONFIG_ETHADDR 00:50:c2:1e:af:fb
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.123.100
#define CONFIG_SERVERIP 192.168.123.115
#define CONFIG_BOOTFILE "zImage"
#define CONFIG_BOOTCOMMAND "tftpboot\; go 0c480000"
#define CFG_LOAD_ADDR 0x0c480000
I'm running Fedora Core 4 on my PC. I've got the tftp-server rpm
installed, iptables turned off, tftp service enabled and xinetd
restarted, zImage copied under the /tftpboot/ directory. But after 5 sec
boot delay the TFTP seemed to time out like this:
TFTP from server 192.168.123.115; out IP is 192.168.123.100
Filename: 'zImage'
Load address: 0xc480000
Loading: T T # # T # T T (omitted)
Retry count exceeded; starting again
Then I interrupted the command and tried to ping my PC:
jx44b0>ping 192.168.123.115
host 192.168.123.115 is alive
I think the network condition is OK, but the TFTP always times out. I
want to configure a longer timeout value for TFTP but don't know where.
Waiting for your reply. Thanks a lot.
Best regards,
Zhen Wang
next reply other threads:[~2005-11-10 3:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-10 3:10 Zhen Wang [this message]
2005-11-10 3:18 ` [U-Boot-Users] TFTP times out? Sam Song
2005-11-10 4:19 ` Zhen Wang
2005-11-10 4:37 ` Bharathi Subramanian
2005-11-10 6:12 ` Zhen Wang
2005-11-10 8:42 ` Wolfgang Denk
2005-11-10 7:59 ` Eckart Goehler
-- strict thread matches above, loose matches on Subject: below --
2005-11-10 9:23 André Berggren
2005-11-10 13:40 ` Jerry Van Baren
2005-11-10 15:12 ` NZG
2005-11-11 6:18 ` Zhen Wang
2005-11-11 8:49 Martin Krause
2005-11-11 9:36 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4372BA28.9040401@gmail.com \
--to=mailtojarod@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox