[U-Boot-Users] [PATCH] Support for the Lite5200B

[U-Boot-Users] [PATCH] Support for the Lite5200B

[Txema Lopez]

Hi all,

This is a patch to support the new Lite5200B board based on the 
MPC5200B. It has been implemented as a modification of the actual 
icecube. The main differences beetwen both boards are the type and 
amount of ram and flash memory. The Lite5200B has 256M of DDR ram and 32 
M of flash mapped in two banks.It's used the cfi flash driver but it's 
needed a patch for this driver to support the x8/x16 flash in x8 mode. 
There is a patch supplied by Alex Bastos and I supply another one.
 
Signed-off-by: Jose Maria Lopez <tlopez@aotek.es>

CHANGELOG

* Add support for the Lite5200B board:
     Patch by Jose Maria Lopez, 16 Jan 2006
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lite5200b_patch
Url: http://lists.denx.de/pipermail/u-boot/attachments/20060116/7616f198/attachment.txt 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tlopez.vcf
Type: text/x-vcard
Size: 427 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060116/7616f198/attachment.vcf 

[U-Boot-Users] [PATCH] Support for the Lite5200B

[Wolfgang Denk]

In message <43CB7409.90807@aotek.es> you wrote:
>
> * Add support for the Lite5200B board:
>      Patch by Jose Maria Lopez, 16 Jan 2006

Checked in, thanks.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is impractical for  the  standard  to  attempt  to  constrain  the
behavior  of code that does not obey the constraints of the standard.
                                                          - Doug Gwyn