* [U-Boot-Users] Debug
@ 2006-01-20 12:04 Mustafa Çayır
2006-01-20 12:42 ` Scott McNutt
0 siblings, 1 reply; 2+ messages in thread
From: Mustafa Çayır @ 2006-01-20 12:04 UTC (permalink / raw)
To: u-boot
Hi,
Which tool must i use to debug u-boot codes. BDI2000 or windriver visionclick, which one do you prefer? is step by step code tracing possible?
thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060120/5ed7fab5/attachment.htm
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] Debug
2006-01-20 12:04 [U-Boot-Users] Debug Mustafa Çayır
@ 2006-01-20 12:42 ` Scott McNutt
0 siblings, 0 replies; 2+ messages in thread
From: Scott McNutt @ 2006-01-20 12:42 UTC (permalink / raw)
To: u-boot
Hi Mustafa,
> BDI2000 or windriver visionclick, which one do you prefer?
That's an easy one for me: Anything _other_than_ VisionClick.
My experience with VisionClick, VisionXXX has been
terrible -- I doubt I will _ever_ buy another -- and
the the support was horrible.
Look at the BDI2000 or Lauterbach (Trace32).
Regards,
--Scott
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-01-20 12:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-20 12:04 [U-Boot-Users] Debug Mustafa Çayır
2006-01-20 12:42 ` Scott McNutt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox