From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Felipe_Gil_Casti=F1eira?= Date: Tue, 24 Jan 2006 11:40:04 +0100 Subject: [U-Boot-Users] AmigaOneG3SE_config: sys/types.h: No such file or directory In-Reply-To: References: Message-ID: <43D60404.1030102@uvigo.es> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I have recently build the bios emulator included in AmigaOneG3. As you say, there is not "sys/types.h", but that is only the first error (there are lots more). If you search the mailing list, there is a thread (http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/20068) with the answer from Wolfgang: "I'm afraid you have to dig through this mess - unfortunately the AmigaOneG3SE port has never been really maintained." "Problems are caused by the unmaintained source tree for this board." I managed to compile the code for a MPC5200 board, but my VGA initialization test is in standby until I receive a board with the "B" revision of the MPC5200. Best regards, Felipe. KokHow Teh wrote: >Hi; > I try to build AmigaOneG3SE_config target to see if the bios_emulator >builds fine but I bump into "sys/types.h not found" error. True enough, >there is no sys directory in u-boot. > > >make[1]: Entering directory `/home/teh/cvs/u-boot/board/MAI/AmigaOneG3SE' >/opt/eldk-ppc-linux-x86/usr/bin/ppc_74xx-gcc -M -g -Os -fPIC -ffixed-r14 -meabi -fno-strict-aliasing -D__KERNEL__ -DTEXT_BASE=0xfff00000 >-I/home/teh/cvs/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/eldk-ppc-linux-x86/usr/bin/../lib/gcc-lib/ppc-linux/3.3.3/include >-pipe -DCONFIG_PPC -D__powerpc__ -DCONFIG_74xx_7xx -ffixed-r2 -ffixed-r29 -mstring -DTEXT_BASE=0xfff00000 -Wa,-mregnames -DEASTEREGG >-I../bios_emulator/scitech/include -I../bios_emulator/scitech/src/x86emu -Dprintk=printf -Wall -Wstrict-prototypes board_asm_init.S memio.S >AmigaOneG3SE.c articiaS.c flash.c serial.c smbus.c articiaS_pci.c via686.c i8259.c ../bios_emulator/x86interface.c ../bios_emulator/bios.c >../bios_emulator/glue.c interrupts.c ps2kbd.c video.c usb_uhci.c enet.c ../menu/cmd_menu.c cmd_boota.c nvram.c > .depend >AmigaOneG3SE.c:32:7: missing terminating " character >AmigaOneG3SE.c:74:1: missing terminating " character >In file included from ../bios_emulator/scitech/include/x86emu.h:50, > from ../bios_emulator/x86interface.c:1: >../bios_emulator/scitech/include/x86emu/types.h:42:23: sys/types.h: No such file or directory >In file included from ../bios_emulator/scitech/include/x86emu.h:50, > from ../bios_emulator/bios.c:6: >../bios_emulator/scitech/include/x86emu/types.h:42:23: sys/types.h: No such file or directory >../bios_emulator/glue.c:51:24: pasting "mypci_read_cfg_byte" and "(" does not give a valid preprocessing token >../bios_emulator/glue.c:51:24: pasting "pci_read_config_byte" and "(" does not give a valid preprocessing token >../bios_emulator/glue.c:52:25: pasting "mypci_read_cfg_word" and "(" does not give a valid preprocessing token >../bios_emulator/glue.c:52:25: pasting "pci_read_config_word" and "(" does not give a valid preprocessing token >../bios_emulator/glue.c:54:25: pasting "mypci_write_cfg_byte" and "(" does not give a valid preprocessing token >../bios_emulator/glue.c:54:25: pasting "pci_write_config_byte" and "(" does not give a valid preprocessing token >../bios_emulator/glue.c:55:26: pasting "mypci_write_cfg_word" and "(" does not give a valid preprocessing token >../bios_emulator/glue.c:55:26: pasting "pci_write_config_word" and "(" does not give a valid preprocessing token >make[1]: *** [.depend] Error 1 >make[1]: Leaving directory `/home/teh/cvs/u-boot/board/MAI/AmigaOneG3SE' >make: *** [board/MAI/AmigaOneG3SE/libAmigaOneG3SE.a] Error 2 >[teh at ShrekII u-boot 9]$ find . -name sys -print >[teh at ShrekII u-boot 10]$ > > Environment problem? Any insight is appreciated. > >Regards, >TEH > > > >