From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peter Ryser <peter.ryser@xilinx.com>
Date: Wed, 08 Feb 2006 20:15:35 -0800
Subject: [U-Boot-Users] Re: Xilinx ML403/PPC U-Boot support
In-Reply-To: <17386.45657.426834.355460@waldo.lisle.iphase.com>
References: <43D9E2AB.5020108@sbcglobal.net>	<43DEFF49.9090909@xilinx.com> <17386.45657.426834.355460@waldo.lisle.iphase.com>
Message-ID: <43EAC1E7.4040309@xilinx.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Brad,

I've uploaded a zip file that contains FPGA designs for ML300, ML310, 
ML403 and ML410 as well as an U-Boot snapshot with all "Xilinx" patches 
included to
ftp://customer:xilinx at ftp.xilinx.com/upload/xapp542.zip (12 MB)

The design for the ML403 maps the Flash at the reset vector. I have 
several ML403s that completely boot from linear flash - bitstream, 
U-Boot, Linux kernel. I've enabled MTD support in the Linux kernel. With 
that I can upgrade bitstream and Linux image from within Linux.

As you can see from the name the uploaded zip file is part of a project 
to update the current Xilinx application note XAPP542 with a newer 
version. I'm kind of been waiting for the September patches to be 
applied in the U-Boot CVS but figured Wolfgang must be busy with other 
stuff as I was myself.

- Peter


bbosch at iphase.com wrote:

>Peter Ryser writes:
> > BTW: you can find a snapshot of U-Boot with board support for ML300, 
> > ML310, ML403 and ML410 at
> > http://www.xilinx.com/ml410-p/designs/u-boot.zip
> > The snapshot contains the patches that have been submitted to this 
> > mailing list back in September of last year. For ML403 just use
>
>Wolfgang,
>
>Were the Xilinx patches (2005-09-28 thru 2005-10-02) rejected or lost,
>or are they still in your queue?
>
>Peter,
>
>Do you happen to have a design for the ML403 that boots directly from
>the linear flash?  Perhaps with devices mapped as in
>board/xilinx/ml403/xparameters.h?  It would be easier to start with a
>design known to work with U-Boot.
>
>Thanks,
>
>--Brad
>
>
>  
>