From mboxrd@z Thu Jan  1 00:00:00 1970
From: Umar Qureshey <umarq@quartics.com>
Date: Fri, 24 Feb 2006 12:27:00 -0800
Subject: [U-Boot-Users] Re: How to obtain patches?
In-Reply-To: <89A528FE6DB0FA44877BB2F05B84671803C505F5@ZIPPY.Emea.Arm.com>
References: <89A528FE6DB0FA44877BB2F05B84671803C505F5@ZIPPY.Emea.Arm.com>
Message-ID: <43FF6C14.5000900@quartics.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Peter Pearse wrote:

>Umar Qureshey wrote:
>  
>
>>Hi,
>>
>>I have an ARM Integrator/CP which has the embedded environment
>>problem for which you have posted patches.  You mention that
>>"previous patches 009 - 015" are also necessary for this patch to
>>apply.  Question is how do I get those previous patches and this one
>>also?   
>>
>>Thanks,
>>Umar
>>    
>>
>
>http://blog.gmane.org/gmane.comp.boot-loaders.u-boot
>
>Search for words:: [PATCH]
>Written by:: Peter Pearse
>
>to get the patches.
>
>Get all the patches before applying any and check any responses.
>
>My records show 015 replaces 014. 
>
>Regards
>
>Peter
>
>  
>
Hi,

I obtained the u-boot from www.arm.com (U-Boot_34x).  Since the last 
patch (# 15) was applied some time back  in Nov of 2005 then it should 
be part of the u-boot source from arm by now.  Is this correct?  I 
applied just the Integrator/CP environment patch in a dry-run to 
U-Boot_34x and it applied with no errors.

Regards,
Umar